Let VENGEANCE be Yours - Bidding Starts Tuesday, December 11, 2012
#362
JK Enthusiast
Join Date: Oct 2010
Location: Glen Burnie, MD
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by wayoflife
Right On!! Just heard from Northridge4x4 that they are eager to help out with this build. Unfortunately, they aren't exactly sure what we might need and so, I turn to you for some suggestions. So, what do you think Curmudgeon's Revenge could really use?
#363
JK Enthusiast
Join Date: Apr 2009
Location: London, ON
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Northridge could provide something that gives inner strength, like Ken has. New axle shafts, gears, or interior protection for the driver and passengers - seats, cage...
#364
#365
Eternal ***erator
there are a lot of excellent ideas here, but some wont work as I already did them:
It has a EVO rear tailgate table & Tuffy cubby cover.
It has a full set of Rockhard skids (except the evap, which was relocated) It has LoD sliders already, just not installed in the pic. Also has OrFab rock doors not shown.
It has a full Tuffy console, underseat concealment box, glove box, and rear cubby cover. It has a Cobra CB. It has a ton of lights on it already (fog, driving, & long range). Switch panel would be a good idea. It has diff covers already.
It has Lod sliders, Just not on in the pic shown.
It has onboard air, installed but not wired, I was waiting on a switch panel I intended to build this winter.
All excellent ideas, but i had it built to where i was ready to finish my switch panel (winch, air lockers, onboard air) and installation of new axles. That is right where I got stalled.
It has Lod sliders, Just not on in the pic shown.
All excellent ideas, but i had it built to where i was ready to finish my switch panel (winch, air lockers, onboard air) and installation of new axles. That is right where I got stalled.
Last edited by HappyCurmudgeon; 12-15-2011 at 12:13 PM.
#366
JK Junkie
Join Date: Nov 2010
Location: Whitefish,Montana
Posts: 2,261
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HappyCurmudgeon
there are a lot of excellent ideas here, but some wont work as I already did them:
It has a EVO rear tailgate table & Tuffy cubby cover.
It has a full set of Rockhard skids (except the evap, which was relocated) It has LoD sliders already, just not installed in the pic. Also has OrFab rock doors not shown.
It has a full Tuffy console, underseat concealment box, glove box, and rear cubby cover. It has a Cobra CB. It has a ton of lights on it already (fog, driving, & long range). Switch panel would be a good idea. It has diff covers already.
It has Lod sliders, Just not on in the pic shown.
It has onboard air, installed but not wired, I was waiting on a switch panel I intended to build this winter.
All excellent ideas, but i had it built to where i was ready to finish my switch panel (winch, air lockers, onboard air) and installation of new axles. That is right where I got stalled.
It has a EVO rear tailgate table & Tuffy cubby cover.
It has a full set of Rockhard skids (except the evap, which was relocated) It has LoD sliders already, just not installed in the pic. Also has OrFab rock doors not shown.
It has a full Tuffy console, underseat concealment box, glove box, and rear cubby cover. It has a Cobra CB. It has a ton of lights on it already (fog, driving, & long range). Switch panel would be a good idea. It has diff covers already.
It has Lod sliders, Just not on in the pic shown.
It has onboard air, installed but not wired, I was waiting on a switch panel I intended to build this winter.
All excellent ideas, but i had it built to where i was ready to finish my switch panel (winch, air lockers, onboard air) and installation of new axles. That is right where I got stalled.
#367
#368
JK Jedi
Hey everyone, just heard from WARN and they're going to be kicking in a brand new VR8000-s winch with Spydura synthetic rope!!
GO WARN!!
VR8000
Great for lighter trucks, Jeeps, and SUVs
A full 8,000 lb. pulling capacity makes this winch great for lighter trucks, Jeeps, and SUVs. Quick line speed, durable construction, and WARN dependability ensure this winch will come through time and time again.
•Now available in two versions: wire rope with roller fairlead, or WARN Spydura synthetic rope with polished aluminum hawse fairlead
•Legendary WARN reliability and performance; 8,000 lb. (3630 kg) capacity
•Low-profile design will fit most trucks and SUVs
•Separate control pack for various mounting options
•Exclusive brake design for superior winching control
•Durable, smooth, and reliable three-stage planetary geartrain
•Series-wound motor for plenty of power and fast line speed
•Remote control with 12' (3.7m) lead
•94' (28.6m) of wire rope, or 100' ( 30m) of synthetic rope
•Backed by the full WARN Limited Lifetime Warranty
GO WARN!!
VR8000
Great for lighter trucks, Jeeps, and SUVs
A full 8,000 lb. pulling capacity makes this winch great for lighter trucks, Jeeps, and SUVs. Quick line speed, durable construction, and WARN dependability ensure this winch will come through time and time again.
•Now available in two versions: wire rope with roller fairlead, or WARN Spydura synthetic rope with polished aluminum hawse fairlead
•Legendary WARN reliability and performance; 8,000 lb. (3630 kg) capacity
•Low-profile design will fit most trucks and SUVs
•Separate control pack for various mounting options
•Exclusive brake design for superior winching control
•Durable, smooth, and reliable three-stage planetary geartrain
•Series-wound motor for plenty of power and fast line speed
•Remote control with 12' (3.7m) lead
•94' (28.6m) of wire rope, or 100' ( 30m) of synthetic rope
•Backed by the full WARN Limited Lifetime Warranty