Can someone put up the part numbers for the 19/60 springs? Thanks,

 

52126319ac / 68004460aa

not jku springs the jku springs are 18/59

 

That's what's on my unlimited now'. Want the 19/60s'. Thanks.

 

I only want them cuz im adding heavy front bumper to my 2 door with 15/56 springs now but shipping would cost more than the springs were prob , lol I want new ones too or at least low mile take offs im thinkin buying 19/60s from the dealer

 

I got a set of 19/60's from the dealer when I installed a full width front & rear bumper with winch and gained about 1/4 inch in height.

 

jku can be about any combo. My 2013 came with 17/58. My 14 has 18/60 and my buddies 14 has 18/60 too. These are from the factory. It is totally luck of the draw. All three are hard tops with autos.

 

is this chysler just using any thing they feel like using up for springs I mean something must determine what they reach for no??? I was wondering this myself why I have a 14and 15 up front and and 56 in rear and some people have other numbers on two door rubicons im not sure what two door rubicons should have come with originaly any one know ???

 

There is a very comprehensive thread on stock spring.


Lets Solve the Stock Springs Question


/

 

There is a very comprehensive thread on stock springs.


Lets Solve the Stock Springs Question


/

 

Yes there is.

I just needed the part numbers. I was going to go with the 10a springs but with my teraflex leveling kit, I would be having to add more parts to make it drive correctly because of the extra lift. I think the 19/60s will fit the bill, a little stiffer, mine are pooched out now, sagging in 2 opposite corners, and you can feel the softness. I want to revive my suspension without adding ride height.