New Half Door Upper Design?
#1
JK Newbie
Thread Starter
Join Date: Oct 2009
Location: Houston, TX
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
New Half Door Upper Design?
What are these?
http://www.quadratec.com/products/11142_9135_07.htm
I have the factory 2010 half door and uppers. The window design on this new product is different from the factory 07-11 uppers. What's with the two pane design?
http://www.quadratec.com/products/11142_9135_07.htm
I have the factory 2010 half door and uppers. The window design on this new product is different from the factory 07-11 uppers. What's with the two pane design?
Last edited by sand&stone; 03-17-2011 at 07:14 AM.
#2
JK Newbie
Join Date: May 2008
Location: Ellwood City, Pa
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
those look like the upper halves to the mopar half doors. not sure if the uppers and lowers are OEM spec. Best top makes a soft door (upper and lower) for much cheaper. And since its Besttop you know they are reliable. The besttop ones are a wire type frame door not the full thickness door like mopar. But I think the besttop would be better for not only keeping the rain out but also better for storage during those really nice days when no doors are wanted. Good luck
#3
JK Super Freak
I have the bestop soft doors and use them all summer long.... like other posts have stated, they dont keep out all the water but are great for being able to have a set of doors tossed in the back of the jeep....
I thought I read somewhere that the bestop upper door will fit the factory half doors.. that they are actually the same thing...
the bestop upper door set is a lot less than the MOPAR one shown....
-Christopher
I thought I read somewhere that the bestop upper door will fit the factory half doors.. that they are actually the same thing...
the bestop upper door set is a lot less than the MOPAR one shown....
-Christopher
#4
JK Newbie
Thread Starter
Join Date: Oct 2009
Location: Houston, TX
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
I have the 2010 factory half doors & uppers, and I've seen the 2011 & the 2007 uppers. We all have just the one big clear window without the vertical separation. This is something new!
#5
JK Newbie
Thread Starter
Join Date: Oct 2009
Location: Houston, TX
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
...and as far as the Bestop products, if the Bestop half door uppers will fit the factory half doors, that would be good to know because they are not the same. The Bestop uppers are much less bulky & would be easier to store onboard, but I don't think they'll fit
#6
JK Enthusiast
Here ya go:
w w w.quadratec.com/manufacture/MOPAR/Jeep+Doors/index.htm
Wish they would just do a Mopar half door kit. Insane that you have to put these thing together.
w w w.quadratec.com/manufacture/MOPAR/Jeep+Doors/index.htm
Wish they would just do a Mopar half door kit. Insane that you have to put these thing together.
Trending Topics
#9
JK Newbie
Join Date: Feb 2008
Location: Houston Missouri
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
What are these?
http://www.quadratec.com/products/11142_9135_07.htm
I have the factory 2010 half door and uppers. The window design on this new product is different from the factory 07-11 uppers. What's with the two pane design?
http://www.quadratec.com/products/11142_9135_07.htm
I have the factory 2010 half door and uppers. The window design on this new product is different from the factory 07-11 uppers. What's with the two pane design?
#10