Lifters, Short Blocks 3.3L/3.8L
04-06-2008 | 06:31 AM
#1
Thread Starter
JK Junkie
Joined: Dec 2007
Posts: 2,578
Likes: 3
From: Everett, WA
Lifters, Short Blocks 3.3L/3.8L
Lifters, Short Blocks 3.3L/3.8L
Part Numbers:
04892465A$
04621938
68019238A$
68019233A$
68036638A$
68036633A$
Issue Description:
Small Bore Lifters/Tappets: All 3.8L/3.3L RT/JK/CS Vehicles With An Engine Build Of 7-23-07 And After, Have Small Bore Lifters/Tappets. This includes new Mopar service short blocks for past model year vehicle repairs RS,NS & CS. This Is Identified With An [S] Stamped Into The Cylinder Block On The Left Front Side Just Above The Number One [1] Cylinder. Small Bore Lifter/Tappets Have An Outside Diameter Of 0.842 Inches. Large Bore Lifter/Tappets Have An Outside Diameter Of 0.904 Inches. Small Bore Cylinder Block Bore Size Is 21.42-21.45 Millimeters. Large Bore Cylinder Block Bore Size Is 22.98-23.01 Millimeters. Failure To Identify Proper Lifter/Tappets And Aligning Yoke/Retainer, Will Cause Future Engine Failure.
______________________________________
Contact Us at CAGRIS@Chrysler.com for feedback related ONLY to this GPOP Tech Tip. DO NOT email regarding repair procedures unrelated to this Tech Tip or part order inquires. Please include the Part Number (s) and Tech Tip Part Description of the Tech Tip you are referencing for our tracking system.
Part Numbers:
04892465A$
04621938
68019238A$
68019233A$
68036638A$
68036633A$
Issue Description:
Small Bore Lifters/Tappets: All 3.8L/3.3L RT/JK/CS Vehicles With An Engine Build Of 7-23-07 And After, Have Small Bore Lifters/Tappets. This includes new Mopar service short blocks for past model year vehicle repairs RS,NS & CS. This Is Identified With An [S] Stamped Into The Cylinder Block On The Left Front Side Just Above The Number One [1] Cylinder. Small Bore Lifter/Tappets Have An Outside Diameter Of 0.842 Inches. Large Bore Lifter/Tappets Have An Outside Diameter Of 0.904 Inches. Small Bore Cylinder Block Bore Size Is 21.42-21.45 Millimeters. Large Bore Cylinder Block Bore Size Is 22.98-23.01 Millimeters. Failure To Identify Proper Lifter/Tappets And Aligning Yoke/Retainer, Will Cause Future Engine Failure.
______________________________________
Contact Us at CAGRIS@Chrysler.com for feedback related ONLY to this GPOP Tech Tip. DO NOT email regarding repair procedures unrelated to this Tech Tip or part order inquires. Please include the Part Number (s) and Tech Tip Part Description of the Tech Tip you are referencing for our tracking system.
The following users liked this post:
OnBelay (05-03-2020)