How's that MOPAR touch up paint?
#1
JK Enthusiast
Thread Starter
Join Date: May 2013
Location: South AL
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
How's that MOPAR touch up paint?
I just picked up my JK yesterday and it seems like someone in the past couple owners wasn't too soft on it. I was wanting some opinions if it was worth taking it to a body shop, or just ordering some MOPAR touch-up paint. Any experiences with it? I'm very careful with my Jeep, and don't do alot of off-roading, so to me it might be worth it. Also I don't plan on replacing the fenders as I love the painted ones. Any tips on how to fix the front grille, those bugs over the years and pebbles haven't been nice to it, along with the front fenders. The rear passenger fender was swiped pretty good by something, and is my biggest flaw I'd love to see patched. I just couldn't see touch up paint filling the grooves the scratch made. If the MOPAR paint does a good job thought I'd go with it, and just use some sort of filler first.
There's a dent too I'm not sure how I'd work out that's on the gate. Along with the trademark Cowl dent.
While we're at it, any good matches to the hard-top color? Mine's got some chips all along the edges.
And before anyone says it, I know it's a Jeep and these are just battle scars that come with it, but I really would like to make and keep it babied and dent & scratch free.
I appreciate any & all suggestions
There's a dent too I'm not sure how I'd work out that's on the gate. Along with the trademark Cowl dent.
While we're at it, any good matches to the hard-top color? Mine's got some chips all along the edges.
And before anyone says it, I know it's a Jeep and these are just battle scars that come with it, but I really would like to make and keep it babied and dent & scratch free.
I appreciate any & all suggestions
#2
Super Moderator
Join Date: Jun 2011
Location: Hendersonville, Tennessee
Posts: 11,043
Likes: 0
Received 83 Likes
on
75 Posts
Before anything, I would use a good cleaner wax. Some of that may come out or disappear enough that it won't bother you. The Mopar touch up works good for touch up, but not a good choice to repaint an entire area. If you plan on going off road, you will be dealing with imperfections anyways.
#3
I bought some of the touch up paint (commando green) as I have some similar scratches on the front fenders and a rock chip or 2. It comes with a finger nail polish type brush and a pen tip(which does not work). The paint is very runny and does not seem to fill rock chips very well, I basically brushed it on and dabbed it with a piece of paper towel to try to get it to fill in the scratch. If you have a lot of area to cover, I would say get it sprayed at a paint shop. IMHO, I will probably do that when the time comes.
2013 JKUR, 2.5 teraflex, 17x9 V-Tech, Banks cold air, Gibson cat back, 315/70/17 duratrac, RR mod bumper, RR 8500 lbs
2013 JKUR, 2.5 teraflex, 17x9 V-Tech, Banks cold air, Gibson cat back, 315/70/17 duratrac, RR mod bumper, RR 8500 lbs
#4
JK Enthusiast
Thread Starter
Join Date: May 2013
Location: South AL
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
I bought some of the touch up paint (commando green) as I have some similar scratches on the front fenders and a rock chip or 2. It comes with a finger nail polish type brush and a pen tip(which does not work). The paint is very runny and does not seem to fill rock chips very well, I basically brushed it on and dabbed it with a piece of paper towel to try to get it to fill in the scratch. If you have a lot of area to cover, I would say get it sprayed at a paint shop. IMHO, I will probably do that when the time comes.
2013 JKUR, 2.5 teraflex, 17x9 V-Tech, Banks cold air, Gibson cat back, 315/70/17 duratrac, RR mod bumper, RR 8500 lbs
2013 JKUR, 2.5 teraflex, 17x9 V-Tech, Banks cold air, Gibson cat back, 315/70/17 duratrac, RR mod bumper, RR 8500 lbs
Before anything, I would use a good cleaner wax. Some of that may come out or disappear enough that it won't bother you. The Mopar touch up works good for touch up, but not a good choice to repaint an entire area. If you plan on going off road, you will be dealing with imperfections anyways.
#5
JK Junkie
Join Date: Jul 2011
Location: Quinlan, TX
Posts: 2,681
Likes: 0
Received 0 Likes
on
0 Posts
#6
JK Super Freak
Touching up paint, believe it or not, is an acquired skill. Novices like us find it very hard to get the paint to match flush with the original paint. Some of the pro's who do this for a living make an absolute fortune because they make the problem completely disappear. I watched a guy do it once it's really quite impressive.
#7
Here is the hard top touch up paint:
http://www.amazon.com/Wrangler-BLACK.../dp/B004TC3D18
Good luck!
http://www.amazon.com/Wrangler-BLACK.../dp/B004TC3D18
Good luck!
Trending Topics
#8
JK Newbie
Join Date: Apr 2013
Location: Evansville In
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Before anything, I would use a good cleaner wax. Some of that may come out or disappear enough that it won't bother you. The Mopar touch up works good for touch up, but not a good choice to repaint an entire area. If you plan on going off road, you will be dealing with imperfections anyways.
#9
JK Super Freak
Join Date: Jul 2011
Location: north tonawanda new york
Posts: 1,702
Likes: 0
Received 0 Likes
on
0 Posts
I would use a compound and a da polisher or by hand. I would get as much of the blemishes out as possible and then see what your working with. it may take a few passes with the compound to remove any defects but when your done seal it up with some wax. could save you some money in the long run.
#10
JK Enthusiast
Thread Starter
Join Date: May 2013
Location: South AL
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
I would use a compound and a da polisher or by hand. I would get as much of the blemishes out as possible and then see what your working with. it may take a few passes with the compound to remove any defects but when your done seal it up with some wax. could save you some money in the long run.