Dome light won't turn off
#1
JK Newbie
Thread Starter
Join Date: Oct 2010
Location: Forney, TX
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Dome light won't turn off
I did a search and couldn't find an answer, so here it goes. I took the top and doors off the Jeep last night and everything was fine. I just went for a quick drive and the dome light is staying on while driving and won't turn off now that the Jeep is off. I made sure it is off on the stalk and everything is off, but it still won't shut off. I also checked the gate and disconnected the battery but it's still on. Has anyone else had this problem or is it just me. Any suggestions?
I'm sure its something simple but I thought I would ask before throwing my doors back on.
I'm sure its something simple but I thought I would ask before throwing my doors back on.
#4
JK Newbie
Thread Starter
Join Date: Oct 2010
Location: Forney, TX
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
It's both lights. I tried pushing the back one as well, but it stayed on. I've looked all through out the manual and still can't find anything. I think I'll try and pull the fuse next.
#7
JK Newbie
Thread Starter
Join Date: Oct 2010
Location: Forney, TX
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
JK Newbie
Thread Starter
Join Date: Oct 2010
Location: Forney, TX
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
#9
JK Jedi Master
Join Date: Jan 2008
Location: Austin <--> Colorado Springs
Posts: 11,463
Likes: 0
Received 162 Likes
on
154 Posts
Parking Lights, Instrument Panel Lights, and
Headlights
Turn the end of the multi-function control lever to the
first detent for parking lights and instrument panel
lights. Turn to the second detent for headlight operation.
To change the brightness of the instrument panel lights,
rotate the center portion of the multi-function control
lever up or down.
Headlights
Turn the end of the multi-function control lever to the
first detent for parking lights and instrument panel
lights. Turn to the second detent for headlight operation.
To change the brightness of the instrument panel lights,
rotate the center portion of the multi-function control
lever up or down.