Dirty Dog Sun Screen: Velcro Issue
#1
JK Newbie
Thread Starter
Dirty Dog Sun Screen: Velcro Issue
I picked up a 1-piece Dirty Dog Sun Screen about a month ago. It works great but I have one gripe-
When installing, I pulled the Sun Screen tight and attached the velcro part to the sound bar with the provided strips of sticky velcro. Over time, the velcro slowly slid all the way forward almost off the sound bar. Now the Sun Screen sags down and rests on my head, no bueno. I'm only 5'10".... Anyone have a solution to this?
When installing, I pulled the Sun Screen tight and attached the velcro part to the sound bar with the provided strips of sticky velcro. Over time, the velcro slowly slid all the way forward almost off the sound bar. Now the Sun Screen sags down and rests on my head, no bueno. I'm only 5'10".... Anyone have a solution to this?
#2
I picked up a 1-piece Dirty Dog Sun Screen about a month ago. It works great but I have one gripe-
When installing, I pulled the Sun Screen tight and attached the velcro part to the sound bar with the provided strips of sticky velcro. Over time, the velcro slowly slid all the way forward almost off the sound bar. Now the Sun Screen sags down and rests on my head, no bueno. I'm only 5'10".... Anyone have a solution to this?
When installing, I pulled the Sun Screen tight and attached the velcro part to the sound bar with the provided strips of sticky velcro. Over time, the velcro slowly slid all the way forward almost off the sound bar. Now the Sun Screen sags down and rests on my head, no bueno. I'm only 5'10".... Anyone have a solution to this?
I just re-read the post, and realize I have a two-piece screen so my advice may not work, but do contact Dirty Dog, they helped me out.
Last edited by woodyvw9; 07-15-2013 at 05:29 AM. Reason: I did not read the post well enough.
#3
JK Newbie
Thread Starter
Did the velcro come unglued from the soundbar? I had one of mine do that and I just picked up a piece of 3M velcro and put in back. Talk to Dirty Dog though, I had a bungie break and sent them an e-mail and pictures and they shipped me out new stuff at no cost.
I just re-read the post, and realize I have a two-piece screen so my advice may not work, but do contact Dirty Dog, they helped me out.
#4
What happened was the glue on the back of the velcro slowly lifted away from the sound bar after sitting in the sun for some time. I actually replaced it with some 3M velcro, the kind that comes in a roll, and put it across the entire length of the SunScreen. That too slid off after a few really hot days. I contacted them and was told that it's attached correctly so I think that maybe it's a minor design flaw more than anything. Hopefully someone has a way to attach a few bungies on the back of it to pull it tight to the sound bar.
#6
JK Newbie
Thread Starter
I guess I'll try to put some grommets in the back and figure out a way to attach some extra bungies. Maybe even put some pics up in case anyone else runs into this. Thanks for the help guys!
Last edited by G36FF; 07-15-2013 at 12:43 PM.
Trending Topics
#8
JK Newbie
Join Date: Jul 2011
Location: Ottawa, Ontario
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
I had the same issue. Picked up a grommet kit and a couple of bungie cords from a local hardware store ($13 total) Took less than 5 mins to install the grommets and its been good to go ever since.
#9
JK Newbie
Thread Starter
I stopped by Home Depot and did the same. Only took a few minutes and $11. I used a 3/8" grommet kit and black para chord so I could stretch it as tightly as I wanted. Fits really great now, zero sagging.