Rob - You are highlighting a problem that is going to be an epidemic soon as our vehicles age. You should see me even with a can of WD40. I use that old military saying - "if it moves salute it, if it doesn't paint it" I like a working, dirty oily engine bay compared to a non-working good looking one.

 

I know this post is a bit dated, but did this fix your problem?

 

He has not posted since he said "Many months later, my problem has not returned." Looks like it fixed it.

I had the same problem. The only fix in the troubleshooting chart for the code I got was to replace the ABS module; very expensive.

I applied deoxit to the harness connectors, and the problem went away. That was a couple years ago.

 

I'm happy to report that my Jeep is still fixed! The stubborn code has never returned.