Automatic stalls when first put in gear
#11
JK Newbie
Thread Starter
#12
JK Freak
I'm no auto trans guru. There could be other signs or not. I had this happen to me and it was the Torque Converter...when I rebuilt my auto trans at 95K miles I went with an ATS torque converter. The first one they sent me had a defect and when it started to go bad, the jeep would stall out when I shifted into drive/Reverse
The following users liked this post:
bwootters (12-26-2022)
#14
JK Newbie
Thread Starter
I'm no auto trans guru. There could be other signs or not. I had this happen to me and it was the Torque Converter...when I rebuilt my auto trans at 95K miles I went with an ATS torque converter. The first one they sent me had a defect and when it started to go bad, the jeep would stall out when I shifted into drive/Reverse
Good info right there, thank you!
Appreciate everyone's input!
The following users liked this post:
bwootters (12-26-2022)
#15
I know this is a fairly old thread but I was hoping to hear what you found out with this issue. Mine started doing this a few months ago and is exactly as you described. I have a 2012 auto with around 50k miles. Any input would be greatly appreciated.
The following users liked this post:
bwootters (12-26-2022)