2011 jku over drive button
#1
JK Newbie
Thread Starter
Join Date: Jul 2011
Location: victorville, california
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
2011 jku over drive button
so after a few days of playing at the hammers i have been cleaning out my jeep and noticed the OD button had some dirt and such around it. i cleaned the area up and went on my way. when i went to turn the OD off the button got stuck. i had to pry it up to unstick it. i found myself wondering why jeep didnt use a sealed button? anyone else have this problem, and how hard it it to take the console cover off?
#2
JK Junkie
Join Date: Apr 2011
Location: Morris County, NJ
Posts: 2,404
Likes: 0
Received 0 Likes
on
0 Posts
Not sure why they didn't make it sealed, but as far as taking the center console cover off, I believe it's only like 4 screws...if not, maybe 6. It's not hard.
#5
JK Freak
Join Date: Nov 2010
Location: Long Island,NY
Posts: 630
Likes: 0
Received 0 Likes
on
0 Posts
Jeep installed a new shifter in mine because sand got in it... I would bring it in. once it gets stuck, it will always stick. Try it out you will see. Now when on the beach i put taper over it.