Level 8 Motorsports - Tracker
#41
Originally Posted by Foxc
Anyone with 15" trackers yet??? Pics please...
https://www.jk-forum.com/forums/show...pinions-needed!
#42
JK Enthusiast
Join Date: Apr 2011
Location: Boulder City, NV
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the pics. I think it looks great. Thats the setup I'm looking at too: MTR/K 35's on 15". I am leaning towards a rock Krawler 2.5 max travel lift on a JKU. Do I need to worry about rubbing on the fender flares with 3.32 back space?? really like the look though!!
Last edited by Foxc; 03-16-2012 at 08:18 AM.
#43
Sponsoring Vendor
Thread Starter
The only issue you need to worry about is finding the tires! As of right now the 35x12.50-15 MTR w/Kevlar is on back order with NO ETA.
#45
JK Freak
Can you guys please post the correct wheel sizing (backspace/offset) available for this wheel? I ordered and received my 18x9 Trackers with 5" backspace and 0mm offset because I was told over the phone that they only actually come in that spec for the 18x9's. When I got my rims in, I measure them just to check. I think this is the right way to measure backspace, but not 100% sure though. It reads 5".....
Thanks!
Thanks!
#46
Sponsoring Vendor
Thread Starter
Can you guys please post the correct wheel sizing (backspace/offset) available for this wheel? I ordered and received my 18x9 Trackers with 5" backspace and 0mm offset because I was told over the phone that they only actually come in that spec for the 18x9's. When I got my rims in, I measure them just to check. I think this is the right way to measure backspace, but not 100% sure though. It reads 5".....
Thanks!
Thanks!
You are measuring for backspace correctly in that photo.
Last edited by Discount Tire; 03-19-2012 at 11:54 AM.
#47
JK Freak
Just in case anyone here is concerned with how the 5" backspacing will work, I snapped a few pics... I did not need spacers either, not even close.
Kinda hard to see, but there is lots of room at the rear links...
Here is the front at full lock. I had my GF holding the wheel as far as it would go. You can see where my previous tire/rim set-up rubbed the lower control arm. Doesn't do it anymore... My previous rims were actually 5.7" backspace and they only rubbed a little on full turn...
At full turn, not touching the control arm, not even close...
About 1.5" of tire sticking out of the fenders on both sides with the 5" backspace...
Very happy customer. I thought 5" backspace would be a tight fit, (everyone always seems recommends 4.5") but the 5" is perfect IMO.
Last edited by Runewolf1973; 03-19-2012 at 10:43 AM.
#48
JK Enthusiast
Join Date: Aug 2009
Location: Montrose, CO and Palm Desert, CA
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
I'm ready to purchase the polished 17x8.5 -6 offset for my '08 Rubicon with 35" MTR/K's.
That should be a good fit - yes?
What is the availability? I'm leaving the area I'm in now - 92211 in a couple of weeks.
Thanks
That should be a good fit - yes?
What is the availability? I'm leaving the area I'm in now - 92211 in a couple of weeks.
Thanks
#49
Sponsoring Vendor
Thread Starter
Here's the link with more details.
http://www.discounttiredirect.com/di...ck&tmn=Tracker
This wheel will work great with 35" tall tires
Give us a call at 1.888.459.4080 and anyone of our sales agents would be happy to assist you with this purchase.
#50
JK Enthusiast
Join Date: Aug 2009
Location: Montrose, CO and Palm Desert, CA
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
We do not inventory the polished 17x8.5 ET -6 (4.5" BS) Tracker but we can order a set in for you. Lead time is typically 7 to 10 business days to your door.
Here's the link with more details.
http://www.discounttiredirect.com/di...ck&tmn=Tracker
This wheel will work great with 35" tall tires
Give us a call at 1.888.459.4080 and anyone of our sales agents would be happy to assist you with this purchase.
Here's the link with more details.
http://www.discounttiredirect.com/di...ck&tmn=Tracker
This wheel will work great with 35" tall tires
Give us a call at 1.888.459.4080 and anyone of our sales agents would be happy to assist you with this purchase.