Clayton Off Road at Off-Road Expo
10-01-2014, 09:06 AM
#1
Sponsoring Manufacturer
Thread Starter
Clayton Off Road at Off-Road Expo
Clayton Off Road at Off-Road Expo
Come join us at the Off-Road Expo on October 4-5th in Pomona California. We will be located in booth 4712. While you are in our booth, enter for your chance to win a JK control arm kit.
Alex
Marketing Director
Clayton Off Road
10-04-2014, 05:00 PM
#2
Sponsoring Manufacturer
Thread Starter
One more day to come on by if you are in the area from 9-5. Check out some pictures of our new display setup:
Stop by our booth and enter for a chance to win a Jeep Wrangler JK complete control arm kit. Kit includes 8 fully adjustable controls which carry our lifetime warrant against bending or breaking. Valued at $1235:
Demo arm displays our 2x2 1/4" wall square tube lower arms. Pressed in, plugged welded, then fully welded. With new Currie Enterprises narrow style forged Johnny Joints featuring 1 piece bushings on one end, and pressed in OE style mechanically bonded bushings into CNC machined DOM housings on the other:
Close up view of the New Currie Enterprises narrow forged johnny joint. Tough joints, tough arms, make for long lasting suspension systems:
We had Currie Enterprises design this joint specifically for us. New narrow joint with tougher 1 piece greaseable bushings, 1x14" shank with 5" of shank for maximum pinion angle and caster angle adjustability:
Show display arms and 4 link truss and new front D44 truss. We specialize in long arm systems, but we build short arms for most of the JK, TJ, LJ, XJ and ZJ. We also build custom arms, just ask:
Alex
Marketing Director
Clayton Off Road
Stop by our booth and enter for a chance to win a Jeep Wrangler JK complete control arm kit. Kit includes 8 fully adjustable controls which carry our lifetime warrant against bending or breaking. Valued at $1235:
Demo arm displays our 2x2 1/4" wall square tube lower arms. Pressed in, plugged welded, then fully welded. With new Currie Enterprises narrow style forged Johnny Joints featuring 1 piece bushings on one end, and pressed in OE style mechanically bonded bushings into CNC machined DOM housings on the other:
Close up view of the New Currie Enterprises narrow forged johnny joint. Tough joints, tough arms, make for long lasting suspension systems:
We had Currie Enterprises design this joint specifically for us. New narrow joint with tougher 1 piece greaseable bushings, 1x14" shank with 5" of shank for maximum pinion angle and caster angle adjustability:
Show display arms and 4 link truss and new front D44 truss. We specialize in long arm systems, but we build short arms for most of the JK, TJ, LJ, XJ and ZJ. We also build custom arms, just ask:
Alex
Marketing Director
Clayton Off Road
