Would you trade your 37's for 35's? I'm considering it.....
#11
JK-Forum Founder
Join Date: Jul 2006
Location: Laguna Niguel, CA
Posts: 36,534
Likes: 0
Received 16 Likes
on
15 Posts
It seemed as if the OP was talking about trading His 37's for 35's.
I was just trying to inform Him that He already has 35's.
It is true that nearly all tires are smaller than what is marked on the tire, But BFG's are not even close to what is on the tire. In my experience they have always been much smaller than marked.
I was just trying to inform Him that He already has 35's.
It is true that nearly all tires are smaller than what is marked on the tire, But BFG's are not even close to what is on the tire. In my experience they have always been much smaller than marked.
#12
JK Jedi Master
Join Date: Jan 2008
Location: Austin <--> Colorado Springs
Posts: 11,463
Likes: 0
Received 162 Likes
on
154 Posts
I have a set of five 37 12.50 17's (BFG AT) with very low miles. These were originally for my H2, but I traded it and kept the tires. Anyway, I want the jeep lifted, but still want enough gear to at times pull my new boat. Total weight will be around 3500 pounds. I've read around and it seems like 35's with 513's are my best bet. What are others opinions? Anyone want to trade for some 37's? haha By the way, mine is an automatic.
Remember that you will be towing O/D OFF !!
Open up the Drivetrain FAQ and look at the chart. Plug in the 'actual' tire height, find the rpm, then Divide by .69 for a rough estimate of o/d off rpm.
5.13 gears, actual tire height 35"
O/D ON - 2380 rpm @70
O/D OFF - 2380 / .69 = 3450 rpm @ 70
That really isn't a horrible rpm to be towing at...
Again, that's a rough estimate. Someone that is more mathematically inclined than I am will probably know a better way to figure it out. (but it comes out close enough that way for my setup)
#13
JK Newbie
Thread Starter
Join Date: Jan 2009
Location: Venice, FL
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
On the website, it says they're 36.3''. I haven't actually measured them, so I don't know for sure. I guess I'll measure them and go from there. I have actually been overly busy, and can't find time for much of anything right now. I 'll be running a 4'' Rancho and a 1'' body lift..
#14
Sponsoring Manufacturer
Join Date: Nov 2007
Location: Phoenix, AZ
Posts: 687
Likes: 0
Received 0 Likes
on
0 Posts
yeah, but all tires measure less than what is writen on the sidewalls. when it comes to the discussion of gear ratios and power, it always assumes we're working off of what's listed on the sidewalls and not the actual height. needless to say, just because a bfg 37" tires actually measures 34.5", a bfg 35" tire will come up to something like a 32" in reality too.
Yates