Would i need control arms?
01-30-2013 | 09:18 PM
#31
Thread Starter
JK Freak
Joined: Oct 2011
Posts: 781
Likes: 0
From: prospect,pa
Highest we would go for 35's is Rock Krawler's 3.5" lift.
You will want the adjust-ability of the control arms. 2.5" is the highest you should go with out having adjustable arms or drop brackets. Adjustable arms being the better choice.
This will allow you do dial in your rig properly. Going to the 3.5" height we would start out with this system as a minimum.
JK 3.5 FLEX SYSTEM
If you have aftermarket drive shafts that kit will do great. If you want to try and preserve your factory drive shaft you should really step it up to this kit.
JK 3.5 X FACTOR SYSTEM
We run the X-Factor plus kit, 3-link in the rear, and have nothing but good things to say about it.
Smashboogie 4x4s Photos | Facebook
Let us know if we can help you with your build.
You will want the adjust-ability of the control arms. 2.5" is the highest you should go with out having adjustable arms or drop brackets. Adjustable arms being the better choice.
This will allow you do dial in your rig properly. Going to the 3.5" height we would start out with this system as a minimum.
JK 3.5 FLEX SYSTEM
If you have aftermarket drive shafts that kit will do great. If you want to try and preserve your factory drive shaft you should really step it up to this kit.
JK 3.5 X FACTOR SYSTEM
We run the X-Factor plus kit, 3-link in the rear, and have nothing but good things to say about it.
Smashboogie 4x4s Photos | Facebook
Let us know if we can help you with your build.
01-30-2013 | 10:13 PM
#32
Former Vendor
Joined: Oct 2012
Posts: 1,615
Likes: 0
From: Newton, NJ
Here, take a look for yourself...
2011 Jeep JK Rock Krawler X Factor Plus Lift Installation | Facebook
There's plenty of pictures of it in action out our FB page as well!
2011 Jeep JK Rock Krawler X Factor Plus Lift Installation | Facebook
There's plenty of pictures of it in action out our FB page as well!