Wiring options for third brake light on a swing-away tire carrier?
#1
JK Newbie
Thread Starter
Join Date: Feb 2013
Location: Houston, TX
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Wiring options for third brake light on a swing-away tire carrier?
Just installed a Smittybilt rear bumper with the swing-away tire carrier on my 2011 JK Unlimited. Smittybilt didn't include any info on how best to re-route the wire to the third brake light.
Now that the brake light is on the swing away, it seems the brake wire needs to be re-routed.
Any thoughts on how best to do this?
Thanks!
WestTexas
Now that the brake light is on the swing away, it seems the brake wire needs to be re-routed.
Any thoughts on how best to do this?
Thanks!
WestTexas
#2
JK Freak
Join Date: Apr 2011
Location: Lakeland, Florida
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
When I did the swing-out carrier for my 35s I turned it into a major production. Not only was the brake light relocated, I also moved the license plate and added a backup camera.
Here's the old thread:
https://www.jk-forum.com/forums/jk-e...-light-272742/
Here's the old thread:
https://www.jk-forum.com/forums/jk-e...-light-272742/