total nub, ill admit it but question about lifts on 2d and 4d
#1
JK Newbie
Thread Starter
Join Date: Feb 2011
Location: San Antonio, Texas
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
total nub, ill admit it but question about lifts on 2d and 4d
So for example lets says both the 2d and 4d owners put a 3" full traction BB lift on. would they both be at the same height, even though the 2d has shorter wheel base? because i been looking at pictures of jeeps with these kits on and tire size and dang it hard to judge how much higher it would be compared the 2d and 4d. im guessing it doesnt matter but i just want to make sure.
sorry if this is confusing.
sorry if this is confusing.
#4
JK Newbie
Thread Starter
Join Date: Feb 2011
Location: San Antonio, Texas
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Like this one picture (which is how I want the jeep to be) said it had a 2.5 teraflex but there a ok amount of wheel gap that leads me to think he may have a higher lift. but other people dont, including the 4d :/
#5
JK Super Freak
The older TF lift was the same springs for the two and four door.
So you would net a lot more lift on a two dr because there is less weight on the springs.
Sent from my PC36100 using Tapatalk
So you would net a lot more lift on a two dr because there is less weight on the springs.
Sent from my PC36100 using Tapatalk
Trending Topics
#8
JK Newbie
Thread Starter
Join Date: Feb 2011
Location: San Antonio, Texas
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
#9
JK Freak
Join Date: Jun 2010
Location: Fishersville, VA
Posts: 758
Likes: 0
Received 0 Likes
on
0 Posts