Torque specs on suspension parts
#1
JK Junkie
Thread Starter
Join Date: Oct 2008
Location: Fort St John B.C.
Posts: 2,008
Likes: 0
Received 0 Likes
on
0 Posts
Torque specs on suspension parts
Any Jeep Gurus out there know the torque specs of the
Upper and lower contol arms both bolts?
Sway bar links
Track bars
and I think that is it
Thanks in advance
Upper and lower contol arms both bolts?
Sway bar links
Track bars
and I think that is it
Thanks in advance
#2
Lower control arms 125 ft lbs.
Upper control arms 75 ft lbs. on the axle & 125 ft lbs. on the frame end.
Sway bar links 75 ft lbs.
Track bars 125 ft lbs.
Upper control arms 75 ft lbs. on the axle & 125 ft lbs. on the frame end.
Sway bar links 75 ft lbs.
Track bars 125 ft lbs.
Last edited by Robar; 02-16-2009 at 02:48 PM.
#4
JK Enthusiast
Join Date: May 2007
Location: Florida Space Coast...but I get around
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Keep in mind that all of these components MUST be torqued to spec with the full weight of the vehicle on them (IE on the ground and NOT jacked up or on stands)
#6
JK Enthusiast
Join Date: Feb 2009
Location: Thee Great Pacific Northwest, US
Posts: 301
Likes: 0
Received 1 Like
on
1 Post
BUMP....
Anybody know the torque specification (or a torque chart) for all of the front suspension components on the 4dr JK?
Might alleviate a lot of the Death Wobble threads
Anybody know the torque specification (or a torque chart) for all of the front suspension components on the 4dr JK?
Might alleviate a lot of the Death Wobble threads
#7
Trending Topics
#9
Sponsoring Vendor
Off Road Evolution Rep
Off Road Evolution Rep
Join Date: Feb 2008
Location: Fullerton, Ca.
Posts: 3,068
Likes: 0
Received 0 Likes
on
0 Posts
Northridge4x4 click the tech tips button and there is a specs list. It would be nice to have a complete list on here too for quick refrence.