Third brake light advice
#1
JK Enthusiast
Thread Starter
Join Date: Sep 2009
Location: Moyock, NC
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Third brake light advice
Im replacing my stock bumper with a bumper/tire carrier combo...it does not come with provisions or suggestions for the 3rd light
for those who have added a light, how/what did you do? Pics/suggestions please..
FYI, its the Rancho carrier, and Ill be running the factory moab on it with a 35
Thanks for your assistance!
Bryan
for those who have added a light, how/what did you do? Pics/suggestions please..
FYI, its the Rancho carrier, and Ill be running the factory moab on it with a 35
Thanks for your assistance!
Bryan
#2
JK Enthusiast
Join Date: Jan 2010
Location: Sterling, VA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Teraflex 3rd light
TF has a decent solution. It should still work with your carrier but it will not be on the swing out, rather still on the jk tailgate. That's probably how I am going to go once I get my rear bumpr
http://www.teraflex.biz/products/jk-...n-bracket.html
http://www.teraflex.biz/products/jk-...n-bracket.html
#3
JK Junkie
If you are using the stock wheels or ones that have wide enough openings in the wheel there are a couple solutions that go behind the spare rim.
One the simplest is a $10 LED light on the rear glass.
If you run a SEARCH you will find endless solutions.
One the simplest is a $10 LED light on the rear glass.
If you run a SEARCH you will find endless solutions.
#4
JK Enthusiast
Thread Starter
Join Date: Sep 2009
Location: Moyock, NC
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
I have searched, and have seen the ones from different vendors...really leaning towards an LED behind the rim...was just looking for finished product pics...etc...
tks
tks
#5
JK Freak
Join Date: Jan 2009
Location: Lohman, Missouri
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
I bought the 3rd light kit from AEV (CHMSL). It comes with a great bracket that bolts in behind the wheel (using the studs that hold the wheel to the tire carrier).
That is it's strong point, the weak point is the actual light. Three little (fairly dim) LED's make up the light. I went to a Auto Zone and picked up an aux. brake/tail light. Here's the pick of the lights (small one is the AEV).
That is it's strong point, the weak point is the actual light. Three little (fairly dim) LED's make up the light. I went to a Auto Zone and picked up an aux. brake/tail light. Here's the pick of the lights (small one is the AEV).
#7
JK Super Freak
Move you license plate to the spare like I did using a Rock Hard 4x4 relocation bracket then you can use a ORO Plate Lite. It has an LED 3rd brakelight plus a LED (looks like HID) license plate light. All for around $80 through 4wd.com, 4WheelParts, Quadratec or Northridge.
Install thread including wiring codes...https://www.jk-forum.com/forums/jk-write-ups-39/rock-hard-license-plate-relocation-bracket-oro-led-platelite-install-xrc-bumper-90672/
Running light only....
Just the plate light illuminated...
The LED brake light plus the plate light....
Brake light only....
Everything illuminated....
And some daylight shots...
Install thread including wiring codes...https://www.jk-forum.com/forums/jk-write-ups-39/rock-hard-license-plate-relocation-bracket-oro-led-platelite-install-xrc-bumper-90672/
Running light only....
Just the plate light illuminated...
The LED brake light plus the plate light....
Brake light only....
Everything illuminated....
And some daylight shots...