TF Level kit & 305's w/ spacers???
10-28-2010, 06:01 AM
#1
JK Freak
Thread Starter
TF Level kit & 305's w/ spacers???
Is anyone running the TF leveling kit & 1.5" spacers on a 4-door w/ 305's?? I would love to see what it looks like, pics would be great!!!
i was curious of the performance?
geez...i need more coffee....
preferably on stock 17" rims...
i was curious of the performance?
geez...i need more coffee....
preferably on stock 17" rims...
Last edited by Sharkey; 10-28-2010 at 08:06 AM. Reason: Post padding
10-28-2010, 06:44 AM
#2
JK Super Freak
I have read of folks like Pkess3 rubbing with 305s and a 3" lift. I am not sure you really should run 305s with a 1.5" kit if you go off-road at all. Am I wrong about this? Anyone?
Toyo makes a 295 than may work with that setup however.
Toyo makes a 295 than may work with that setup however.
10-28-2010, 07:11 AM
#4
JK Freak
Thread Starter
TF leveling kit...Pro comp 305/65/17..dont now if thats what your looking for
...I do have Incubus rims...never rubbed...ran them on my 2 door with no lift...Attachment 98621Attachment 98622Attachment 98623
...I do have Incubus rims...never rubbed...ran them on my 2 door with no lift...Attachment 98621Attachment 98622Attachment 98623
thx!!!
10-28-2010, 07:29 AM
#5
JK Super Freak
305/65/17 are 32.6" x 12.0" - These should fit fine.
305/70/17 are 33.8" x 12.0" - I think these will rub badly
295/70/17 are 33.26 x 11.6" - I think these are the largest tire you can run with a leveling kit, but I could be wrong.
305/70/17 are 33.8" x 12.0" - I think these will rub badly
295/70/17 are 33.26 x 11.6" - I think these are the largest tire you can run with a leveling kit, but I could be wrong.
10-28-2010, 07:35 AM
#6
JK Freak
Thread Starter
Trending Topics
10-28-2010, 07:57 AM
#8
JK Freak
Thread Starter
10-28-2010, 08:02 AM
#9
JK Freak
Join Date: Sep 2010
Location: Jenks, OK
Posts: 985
Likes: 0
Received 0 Likes
on
0 Posts
you can run a 34 with the kit and 35s with flat fenders and pinch seem trim...just my 2 cents..Im goin with 35s next...but i dont do any hardcore wheeling so I'll be fine...
