doc307

I am running the teraflex 2.5" coil lift and ended up getting more than 3" of lift.
Does anyone have the teraflex quick disconnects and how are they holding up?
Have you noticed any problems with them?

wayoflife

i know of at least a dozen people who are running them and can tell you that they work great

MOWrangler

Worked great with my Rusty's 2" lift, now the are working with my Superlift 4" kit.

greenryde

I have them on my 4 door with a teraflex 2.5 inch budget boost and they work great. Very easy to disco and re-disco. Great productEasy to install to.!!!!!!!

Mark Doiron

Mine work great. They give me something to do while I'm waiting for the Stantz deflators to air down my tires. Here's my write-up of the install:

Teraflex Quick Disconnect Install

jpp

I have them. They work pretty good. I had to shorten the bolts in the sway bar side to get it to swing up into the "docked" position. Other than that, no problems. There is a ton of good info in Mark D's write up thread above.

doc307

Hopefully Joe with teraflex will see this but my question is the disconnects come in 2 sizes..
0-3" and 4-6". Since I got over 3" with my 2.5" lift which ones would I buy?

Mark Doiron

My suggestion: You want the antisway bar parallel to the ground (or close to that) when connected up. So, manually disconnect it and place it into that position and measure the length you would need for the QDs. Contact TF and see which ones are closest.

Just a guess, but I think you'll find the 0-3" are what you need.

jpp

X2. The OME lift yielded me about 3 inches as well. With the 0-3" links installed, the sway bar sits perfectly level to the ground. If they were adjustable, I couldn't have gotten it any closer.

Stampsjk

JPP,

I am getting ready to get the quick disconnects but thought I read previously there was an issue with the old man emu lift and the disconnects. Did you or anyone else have any issues.?

By the way I have the OME HD lift with Full Traction track bars and 35 in tires.