Teraflex quick disco issue ?
#1
JK Freak
Thread Starter
Join Date: Dec 2009
Location: QC, CA
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Teraflex quick disco issue ?
Hey guys, got a set of TeraFlex quick disco and well my bushings are shut after disconnecting them 2 times and roughly 5 000 KMs, see pics bellow. What is going on here ?? Is TeraFlex quality going down the toilet or what ??
M'I the only one having this issue ? Or you are all changing your bushings each time you change your oil ?!
M'I the only one having this issue ? Or you are all changing your bushings each time you change your oil ?!
#3
JK Jedi Master
Mine are four years old and no problems. Plenty of disconnects on them, too. Contact TF and I'll bet they take care of you. FYI, different manufacturers over the years have suffered problems with bushings failing. These are good companies, but I think there may be a supplier or two out there cutting corners, and sometimes the vendors we know suffer that in their own product quality.
#4
JK Freak
Join Date: Nov 2010
Location: Scottsdale, AZ
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
Mine are four years old and no problems. Plenty of disconnects on them, too. Contact TF and I'll bet they take care of you. FYI, different manufacturers over the years have suffered problems with bushings failing. These are good companies, but I think there may be a supplier or two out there cutting corners, and sometimes the vendors we know suffer that in their own product quality.
https://www.jk-forum.com/forums/show...onnect-Install
Thanks for writing it out so well!
#6
JK Enthusiast
Join Date: Mar 2011
Location: New Strawn, KS
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Mine are exactly the same. I greased mine when I got them and at my next oil change. 2k miles later they looked worse than yours did. I just haven't gotten around to ordering new ones. Never thought about sending teraflex a note asking about them replacing them.
#7
Sponsoring Manufacturer
Name/address please.
Trending Topics
#10
JK Freak
Thread Starter
Join Date: Dec 2009
Location: QC, CA
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Yup, I did grease them but did not make any difference. I have cleaned the quick disco for the picture so we can clearly see the issue.
In any case TF is really there for their customer this is one of the reason why I always consider TF when it time to get suspensions parts
In any case TF is really there for their customer this is one of the reason why I always consider TF when it time to get suspensions parts