Teraflex Monster Forged Trackbar
#13
JK Jedi
Thread Starter
#15
JK Enthusiast
Join Date: Nov 2006
Location: West Jordan, UT
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
I have the Tera Flex 4 lift and I am running 37 MTR's and with the TB that Tera had with their 1st Gen lifts I had a shimmy when ever I would hit a bump or pothole, but Tera upgraded me to the HD TB and I have had no problems since.
#16
Sponsoring Manufacturer
Correct, as in Death Wobble . We have seen several of our competitors bars on local JK with blown ends (heims/poly) and 3"-5" of flexing in the bend area on a TB. Even our Gen 1 TB's did this, hence why TeraFlex dropped them and created the forged Monster series. In a few months TeraFlex will offer a rear forged TB to match.
#17
JK Jedi
Thread Starter
#18
JK Junkie
Keep in mind that if you break the Track bar you will NOT be able to steer the Jeep at all! Once broken when you turn the wheel the axle will only shift from side to side and the ESP will go NUTS and throttle the JK down to 5mph! Lets just say the person that this happened to had a VERY long slow difficult drive home..
#20
JK Jedi
Thread Starter