RST JK

I currently have a teraflex leveling kit with 33" Duratracs. I would like to upgrade my shocks to the Bilstein 5100s. From what I have been reading, in order to prevent over compressing my coils, or even popping a coil under full flex (sway bar dissconnected)with the Bilstein 5100s I should add some bumpstops. So here's my questions...
What bumpstops would be ideal?

I have been researching the teraflex (Teraflex 953800 - TeraFlex Front Upper Bump Stop for 07-13 Jeep® Wrangler & Wrangler Unlimited JK - Quadratec) for the front and (Teraflex 1954700 - TeraFlex Rear Lower Bump Stops for 07-13 Jeep® Wrangler & Wrangler Unlimited JK with 3" or Higher Lift - Quadratec) for the rear.

Are these too large for a leveling kit?
Will I loose suspension travel?

Thanks in Advance

TeraFlex

Get Bilsteins that in the 0-2" range and you will not need the bumpstops.

RST JK

Do the Bilstein 5100s come in the 0 - 2" range? Can't seem to find them anywhere.