Tailgate ideas after removing spare carrier
#12
JK Enthusiast
Thread Starter
Join Date: Jun 2011
Location: Katy, TX
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
On my 2011 I installed the Rampage cover, after having it painted to match my JK, installed the new license plate bracket and light, plugged the old license plate bracket hole with an OEM plug. I plugged the holes left in the rear deck with Vector hole plugs, and I put these on the hood after removing the OEM rubber windshield bumpers. They worked great.
#13
JK Enthusiast
Join Date: Feb 2011
Location: Wilmington, NC
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Vector Offroad
Here are a few pics of our Element Plate. It allows you to keep your factory baffle in place. The baffle helps keep water out of the tailgate, and it regulates the air pressure inside the Jeep. You can mount RotoPax on the plate, leave it blank, or use it as a relocation point for your license plate. We also have our rear ufo's that fill in the two holes left by the rubber bumpers. Here is a link to our website: http://www.vectoroffroad.com Our plate provides the most useful options on the market. Here is another link to our Element Plate thread here on the JK-Forum: https://www.jk-forum.com/forums/show...-Element-Plate
#14
JK Enthusiast
Join Date: Jun 2011
Location: Nederland, TX
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Here are a few pics of our Element Plate. It allows you to keep your factory baffle in place. The baffle helps keep water out of the tailgate, and it regulates the air pressure inside the Jeep. You can mount RotoPax on the plate, leave it blank, or use it as a relocation point for your license plate. We also have our rear ufo's that fill in the two holes left by the rubber bumpers. Here is a link to our website: http://www.vectoroffroad.com Our plate provides the most useful options on the market. Here is another link to our Element Plate thread here on the JK-Forum: https://www.jk-forum.com/forums/show...-Element-Plate
#15
Sponsoring Manufacturer
We ran the free UFO's promotion when we first introduced the Element Plates. The Element Plate is currently one of our best selling products. We won't be doing that promo anytime in the near future. Thanks for the interest though.
#16
JK Enthusiast
Just go to a hobby shop first and pick out some vinyl that you like. Put some colored vinyl down first so it shows though. Red/Yellow/Chrome or something would look really good.
Last edited by WhosUrBuddiee; 07-28-2011 at 11:45 AM.
#17
JK Junkie
#18
JK Enthusiast
Join Date: Aug 2010
Location: Kelowna, BC
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
I like the tramp stamp. I may have to go that route.
One a separate note where are u guys all getting the ass plugs to fill in the factory holes for the brakelight and tire standoffs. I checked home depot and rona but had no luck.
One a separate note where are u guys all getting the ass plugs to fill in the factory holes for the brakelight and tire standoffs. I checked home depot and rona but had no luck.
#19
JK Freak
Join Date: Jan 2009
Location: richburg, south carolina
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
#20
JK Freak
Join Date: Jan 2009
Location: richburg, south carolina
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
i got mine for free from a forum member, all i had to do was send him shipping money. he had a post up that said he had a ton of those plugs to just pm him if you wanted them.