Synergy Tie Rod Ends
#3
JK Jedi
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
I looked around one day and no one had them locally. Id i recall its 7/8_14 thread and the castle nut end is 1/2-20. Around 6" overall if i recall? We had to end up getting the synergy specific online.
#4
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
7/8 shank with 18 TPI. Standard 3/4 ton GM rod end. Part numbers are ES2234R and ES2234L respectively for right and left hand thread
Last edited by D_engel; 02-17-2015 at 04:08 PM.
#5
JK Jedi
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
I take it there tie rod ends on the tie rod are different than the tres on the drag link? When a locals drag link end went out. We could not find one anywhere in town. We had 3 different parts stores look. I guess it could have just been my luck also lol
#6
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
Nah, theyre the same part # between both the tie rod and drag link. I never trust the folks at the parts store
#7
JK Jedi
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
Ok just looked it up. The rh they have all over. We needed the lh. That is not anywhere locally for me. So to me thats a big downside is the fact that its not available locally. Pirate shows a es2010l being able to work but also not stocked locally for me.