Synergy Drag Link Question
#1
-
Thread Starter
Join Date: Jan 2012
Location: Michigan
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
Synergy Drag Link Question
does anyone know if I can install the synergy drag link for there high steer kit in the oem position? I do not need to flip it at this time.
#4
JK Jedi Master
Join Date: Jan 2008
Location: Austin <--> Colorado Springs
Posts: 11,463
Likes: 0
Received 162 Likes
on
154 Posts
You could probably even find some more information in the 'other' synergy drag link in stock position thread a bit further down here on this first page.
I don't remember the dates I started buying synergy components, but I think I ran the drag link in stock position for about a year and a half while getting around to adding the tie rod and trackbar, then finally adding the bracket and flipping.
I don't remember the dates I started buying synergy components, but I think I ran the drag link in stock position for about a year and a half while getting around to adding the tie rod and trackbar, then finally adding the bracket and flipping.
#5
JK Jedi
Join Date: Dec 2011
Location: Nevada City California
Posts: 5,234
Likes: 0
Received 3 Likes
on
3 Posts
For install reference, depending on length of your shocks, you won't want to flip for a high steer. With the long shocks I run, I'm stuck with a high steer bracket and synergy drag adapter sleeve not being used because my track bar would hit the frame. Could avoid this with longer bump stops, but I wanted to keep the longer travel.
#6
-
Thread Starter
Join Date: Jan 2012
Location: Michigan
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
For install reference, depending on length of your shocks, you won't want to flip for a high steer. With the long shocks I run, I'm stuck with a high steer bracket and synergy drag adapter sleeve not being used because my track bar would hit the frame. Could avoid this with longer bump stops, but I wanted to keep the longer travel.
Sent from my iPhone using Tapatalk
#7
JK Jedi
Join Date: Dec 2011
Location: Nevada City California
Posts: 5,234
Likes: 0
Received 3 Likes
on
3 Posts
If I buy this drag link let me know if you'd be willing to sell your brackets. I may be interested.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Trending Topics
#8
Did you get your drag link installed? I dont mean to hi-jack your thread. Im in the process of installing this, but have no experience. I have both sides in and am trying to tighten the jam nut but the drag link bend seems to swing down and hit the tie rod. Am i missing something. Thanks in advance.
#9
JK Jedi
Join Date: Dec 2011
Location: Nevada City California
Posts: 5,234
Likes: 0
Received 3 Likes
on
3 Posts
Did you get your drag link installed? I dont mean to hi-jack your thread. Im in the process of installing this, but have no experience. I have both sides in and am trying to tighten the jam nut but the drag link bend seems to swing down and hit the tie rod. Am i missing something. Thanks in advance.
#10
I am not quite sure what you mean by joint. I do have a C clamp. Im still at work but wondering now. Is there a jam nut on each side? The one that I was trying to tighten was the one by the pitman arm. I am horrible at this! I might have to go find a joint to smoke after this!