suspension lift and a body lift???
#1
JK Newbie
Thread Starter
Join Date: Sep 2013
Location: mcdonough, GA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
suspension lift and a body lift???
I was thinking about getting the rubicon express 3.5" suspension lift for my 2010 jk and a 1" body lift. didnt know if this was a do-able thing or if it was one or the other or how it would work. It's my first jeep and I'm new to the lift kit world but ready to start modding my jeep any help or suggestions would be appreciated.
#2
JK Junkie
Wow, what size tire are you trying to run? Start there and back into the lift size. Use as little lift as needed. 2.5" and flat fenders and you can easily run 37's. after 2.5" to 3", it gets expensive as you need drive shafts, etc. Someone can link you to the sticky thread about lifts and tire size.
#3
JK Junkie
Yep. Here's my rig with a Rock Krawler 2.5 lift, trimmed factory fenders and 37's.
Attachment 500805
Attachment 500805
#6
JK Forum Regional Rep
Join Date: Jan 2011
Location: Stockton.Ca
Posts: 2,921
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to the forum I'd skip the body lift to keep your COG in check.We have a 4" suspension,2" body which a lot for 37's.But there has a few times the pucker factor came into play.Planning to remove the body lift
Trending Topics
#10
JK Enthusiast
I'm running a 3.5 RK susp lift w/ 1" BL, and all is well. That said...I'd get the suspension lift first--if you need more room to stuff, you can add the extra 1" BL later.