DH2002

So I bought a new Quadratec steering stabilizer to replace my stock stabilizer because my OEM one has a decent dent in it due to wheeling. so I replace the shock and decide to take a run on the highway to make sure everything was ok and once I hit 40 mph I got death wobble like crazy, I have never had the problem before so I immediately went home and put the OEM stabilizer back on and presto! no wobble at all. So needless to say very confused....Thanks for any help...

kjeeper10

Its prob not related. Did you check track bar torque ?

DH2002

Yeah everything is torqued right its just weird because with OEM it was no wobble bot even a shimmy but I put the new one on and it wobbles like crazy, Thats why I put the original back on....

ronjenx

Put the new one on again to see if it's repeatable.

Chuck-The-Ripper

I've had had problems running different stabilizers over the past couple years. I just don't use one anymore. They always give me a wobble or deathwobble.

JayswranglerX

Please tell me that's a joke

Sent from my SM-N920T using JK-Forum

Chuck-The-Ripper

Nope. Please tell me why you say that.

kjeeper10

Really ? I can see a SS either doing nothing (blown) or binding the steering from turning (bent or set incorrectly), not cause DW.

JayswranglerX

They do nothing to contribute to wobble. If anything they minimize shimmy and wobble.

Sent from my SM-N920T using JK-Forum

NatteyB

What are the odds you installed it backwards? Mine is in the opposite direction from the oem stabilizer.