Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Steering help?

Thread Tools
 
Old 06-22-2015, 04:08 PM
  #1  
JK Enthusiast
Thread Starter
 
bullbray's Avatar
 
Join Date: Jul 2011
Location: Cordova,TN
Posts: 148
Likes: 0
Received 0 Likes on 0 Posts
Default Steering help?

Put a new adjustable track bar on tonight, had to turn steering wheel to get it to line up. Now steering wheel is not centered and can't go over 5 mph because traction control crap starts braking for me. Anybody got some advice on how to fix it or what I did wrong?
Old 06-22-2015, 04:12 PM
  #2  
JK Enthusiast
 
Albino Lizard's Avatar
 
Join Date: Jun 2015
Location: Merced, ca
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bullbray
Put a new adjustable track bar on tonight, had to turn steering wheel to get it to line up. Now steering wheel is not centered and can't go over 5 mph because traction control crap starts braking for me. Anybody got some advice on how to fix it or what I did wrong?
If the steering wheel is leaning left rotate the draglink adjuster away from you (wrench down) until it is center again. Do the opposite if it is leaning right.

How much lift do you have?
Old 06-22-2015, 04:14 PM
  #3  
JK Enthusiast
Thread Starter
 
bullbray's Avatar
 
Join Date: Jul 2011
Location: Cordova,TN
Posts: 148
Likes: 0
Received 0 Likes on 0 Posts
Default

2.5 but it's been on for 4 years installed a factory track bar a few years ago and didn't have this problem.
Old 06-22-2015, 04:15 PM
  #4  
JK Enthusiast
 
Albino Lizard's Avatar
 
Join Date: Jun 2015
Location: Merced, ca
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bullbray
2.5 but it's been on for 4 years installed a factory track bar a few years ago and didn't have this problem.
Your new bar wasn't the same length. You could take it off and adjust it.
Old 06-22-2015, 04:20 PM
  #5  
JK Enthusiast
Thread Starter
 
bullbray's Avatar
 
Join Date: Jul 2011
Location: Cordova,TN
Posts: 148
Likes: 0
Received 0 Likes on 0 Posts
Default

It's adjusted all the way in, and i still had to turn the wheel to the right to bring it closer? I'm wishing I would have just got a regular bar instead of adjustable one now.
Old 06-22-2015, 04:27 PM
  #6  
JK Enthusiast
Thread Starter
 
bullbray's Avatar
 
Join Date: Jul 2011
Location: Cordova,TN
Posts: 148
Likes: 0
Received 0 Likes on 0 Posts
Default

Do I need to jack it up to adjust the drag link?
Old 06-22-2015, 04:29 PM
  #7  
JK Enthusiast
 
Albino Lizard's Avatar
 
Join Date: Jun 2015
Location: Merced, ca
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bullbray
It's adjusted all the way in, and i still had to turn the wheel to the right to bring it closer? I'm wishing I would have just got a regular bar instead of adjustable one now.
Just adjust you drag link. Its easy. Loosen the clamp bolts and crank on the sleeve with your hand or a pipe wrench if necessary.
Old 06-22-2015, 04:30 PM
  #8  
JK Enthusiast
 
Albino Lizard's Avatar
 
Join Date: Jun 2015
Location: Merced, ca
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bullbray
Do I need to jack it up to adjust the drag link?
No you dont
Old 06-22-2015, 04:37 PM
  #9  
JK Enthusiast
Thread Starter
 
bullbray's Avatar
 
Join Date: Jul 2011
Location: Cordova,TN
Posts: 148
Likes: 0
Received 0 Likes on 0 Posts
Default

It was easy thanks for advice, obviously I'm no mechanic!
Old 06-22-2015, 04:39 PM
  #10  
JK Enthusiast
 
Albino Lizard's Avatar
 
Join Date: Jun 2015
Location: Merced, ca
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bullbray
It was easy thanks for advice, obviously I'm no mechanic!
We all learn something every day. I installed my evo enforcer pro lift. Those were several days of learning. Glad it worked out.


Quick Reply: Steering help?



All times are GMT -8. The time now is 01:54 PM.