Snorkel
04-02-2013, 08:03 AM
#12
JK Enthusiast
Join Date: Jul 2012
Location: Woodinville, WA
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Rugged ridge hasn't made the snorkel compatible with the 2012 yet but rumors are that this spring/summer we will see either an update to the current snorkel or a new kit all together to work with the 2012.
I also vote rugged ridge, I have it on my 09 and I wouldn't go any other way.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=441644"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=441645"/>
I also vote rugged ridge, I have it on my 09 and I wouldn't go any other way.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=441644"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=441645"/>
04-02-2013, 08:33 AM
#14
OK LADIES lol don't think anyone's answered the OP's question tho!!!
I used a 2" hole saw to start and then an angle grinder..... worked just fine
I'm still in favour of look at my jeep it has a snorkel.... I went AEV GEN 2 snorkel
I used a 2" hole saw to start and then an angle grinder..... worked just fine
I'm still in favour of look at my jeep it has a snorkel.... I went AEV GEN 2 snorkel
04-02-2013, 08:50 AM
#15
JK Enthusiast
Join Date: Aug 2012
Location: Wyomissing, pa
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
To answer the op.....I first used a small bit to make sure everything was where it should be, then used a hole saw for my cut and then a dremel to clean it up slightly where needed. I went with the volant setup which can be found for way better prices than most of the big name vendors have suprisingly
http://www.flickr.com/photos/67956300@N03/8547876499/http://www.flickr.com/photos/67956300@N03/8547876499/ by http://www.flickr.com/people/67956300@N03/, on Flickr
http://www.flickr.com/photos/67956300@N03/8547876499/http://www.flickr.com/photos/67956300@N03/8547876499/ by http://www.flickr.com/people/67956300@N03/, on Flickr
04-02-2013, 09:57 AM
#16
JK Freak
Stand corrected. I ordered and last checked back at Christmas time and that was the answer I got from rugged ridge lol
04-02-2013, 01:00 PM
#17
JK Enthusiast
Join Date: Jun 2009
Location: Netherlands
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
I have just installed the AEV on my 2011 Diesel: used a 2" hole saw for the corners and a Dremel cutting wheel for the straight part (AEV Snorkel on Black Boar | Black Boar)
De 2nd gen AEV works for both the petrol versions as well as with 2.8 CRD Diesel version.
De 2nd gen AEV works for both the petrol versions as well as with 2.8 CRD Diesel version.
Last edited by nkijkuit; 04-03-2013 at 10:31 AM.
04-02-2013, 05:42 PM
#20