smittybilt fenders?
#21
JK Newbie
Join Date: May 2011
Location: Nanaimo BC Canada
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I say you do, I bought my jk in April 2011 and put a different set of fenders on.....and they broke..... so i put another set on...they too broke.....
These XRC fenders are not flimsy, cheep feeling at all. Some people worry about if they are legal, pffffft..... I'm okay with putting a rubber extension on and still having a SOLID set of fenders. I was out wheeling today after work and hit a tree with one of my fronts. Not a ding on the fender and the tree was left crying... This is only my modest opinion but if you are going to spend the money and time installing aftermarket fenders, you might as well only do it once.
Happy wheeling to all. Tom
#22
JK Enthusiast
Join Date: Mar 2012
Location: Corona, CA
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Lovebombtom
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=204927"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=204928"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=204929"/><img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=204930"/>
All said and done, to do both the front and the rear took me about 12-13 hours... (in my driveway) I would not try to do these again by myself. Four hands would have made it go a lot faster...That being said. I am 100% satisfied with these, solid as a rock.
All said and done, to do both the front and the rear took me about 12-13 hours... (in my driveway) I would not try to do these again by myself. Four hands would have made it go a lot faster...That being said. I am 100% satisfied with these, solid as a rock.
#23
#24
Super Moderator
Join Date: Jun 2011
Location: Hendersonville, Tennessee
Posts: 11,043
Likes: 0
Received 83 Likes
on
75 Posts
Originally Posted by jkarnholt
I'm running 35s with a RC 3.5" lift. I love these fenders but they were a PIA to put on. I had trouble with some of the nutcerts pulling out of the body. Would have been much easier with a rivet nut gun. Overall I am happy with how they turned out.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=288145"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=288145"/>
#25
JK Enthusiast
Join Date: Mar 2012
Location: Corona, CA
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jkarnholt
I'm running 35s with a RC 3.5" lift. I love these fenders but they were a PIA to put on. I had trouble with some of the nutcerts pulling out of the body. Would have been much easier with a rivet nut gun. Overall I am happy with how they turned out.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=288145"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=288145"/>