show me how you mounted your rear LED/Work lights...
11-20-2014 | 03:54 PM
#1
Thread Starter
JK Super Freak
Joined: Mar 2014
Posts: 1,156
Likes: 2
show me how you mounted your rear LED/Work lights...
Curious to see some of the usual great ideas you guys come up with to help me decide how to mount up my RI dually!
Sent from my LG-LS980 using JK-Forum
Sent from my LG-LS980 using JK-Forum
11-20-2014 | 06:09 PM
#2
Former Vendor
Joined: Jan 2013
Posts: 1,271
Likes: 2
From: South East MA
I went with the SR-M lights in the tail lamps and a 6" single row flood on the bumper - a little excessive, but I like being obnoxious. For a single dually, you could fab something up above your third brake light/spare tire. Or even below your spare tire on the bumper. Good luck! 
11-20-2014 | 07:15 PM
#3
Thread Starter
JK Super Freak
Joined: Mar 2014
Posts: 1,156
Likes: 2
I went with the SR-M lights in the tail lamps and a 6" single row flood on the bumper - a little excessive, but I like being obnoxious. For a single dually, you could fab something up above your third brake light/spare tire. Or even below your spare tire on the bumper. Good luck!
I like the idea of fabbing something above the spare
Sent from my LG-LS980 using JK-Forum
11-20-2014 | 10:58 PM
#4
JK Freak
Joined: May 2009
Posts: 998
Likes: 1
From: Enumclaw,WA
Dually LEDs on a custom mount. Took me a few tries but works great. I like them high - works great for backing up my utility trailer. I have since installed a 3rd brake light off the bracket to the inside of the spare
11-21-2014 | 04:23 AM
#5
Thread Starter
JK Super Freak
Joined: Mar 2014
Posts: 1,156
Likes: 2
Sent from my LG-LS980 using JK-Forum
11-21-2014 | 12:15 PM
#7
Thread Starter
JK Super Freak
Joined: Mar 2014
Posts: 1,156
Likes: 2
Here is what I did. I used an ORO License Plate Relocation Kit with LED brake & running lights, a Optilux 6 LED light bar and a short piece of 1x1 aluminum angle.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=585167"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=585168"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=585169"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=585167"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=585168"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=585169"/>
Sent from my LG-LS980 using JK-Forum
Trending Topics
11-21-2014 | 12:43 PM
#9
JK Super Freak
Joined: Jul 2011
Posts: 1,384
Likes: 2
From: Calgary, AB
I think I may borrow that idea come spring and add higher lights on the rear. Mine are 2 visionx flush mounts in the bumper, great light but its pretty low and doesn't get the greatest spread as it did when it was high.
