Shop Recommendations in SoCal
#1
Shop Recommendations in SoCal
I live in Menifee, CA (close to Temecula) and want to mount 35" tires on my stock JK rims. I have 2.5" TF lift, 1.5" spacers, and pinch seem trimmed already in place. I have a 2012 JKUR. The 35" tires have a manufacturers date of 2012 and have 3k miles on them. I need to mount all 5.
The Menifee Tire Shop will not mount because they feel that the rims are too narrow (7.5", and their system says that 8" is minimum), and there may be rubbing issues. I had 35" wheels on before and didn't rub, but decided to go back to my stock wheels for a while until my lift is done and sold off the old 35" wheels.
ORW and 4WheelParts are busy and a little pricey. So I'm hoping that my fellow JK owners can point me in the right direction.
Thanks in advance!
The Menifee Tire Shop will not mount because they feel that the rims are too narrow (7.5", and their system says that 8" is minimum), and there may be rubbing issues. I had 35" wheels on before and didn't rub, but decided to go back to my stock wheels for a while until my lift is done and sold off the old 35" wheels.
ORW and 4WheelParts are busy and a little pricey. So I'm hoping that my fellow JK owners can point me in the right direction.
Thanks in advance!
#4
I live in Menifee, CA (close to Temecula) and want to mount 35" tires on my stock JK rims. I have 2.5" TF lift, 1.5" spacers, and pinch seem trimmed already in place. I have a 2012 JKUR. The 35" tires have a manufacturers date of 2012 and have 3k miles on them. I need to mount all 5.
The Menifee Tire Shop will not mount because they feel that the rims are too narrow (7.5", and their system says that 8" is minimum), and there may be rubbing issues. I had 35" wheels on before and didn't rub, but decided to go back to my stock wheels for a while until my lift is done and sold off the old 35" wheels.
ORW and 4WheelParts are busy and a little pricey. So I'm hoping that my fellow JK owners can point me in the right direction.
Thanks in advance!
The Menifee Tire Shop will not mount because they feel that the rims are too narrow (7.5", and their system says that 8" is minimum), and there may be rubbing issues. I had 35" wheels on before and didn't rub, but decided to go back to my stock wheels for a while until my lift is done and sold off the old 35" wheels.
ORW and 4WheelParts are busy and a little pricey. So I'm hoping that my fellow JK owners can point me in the right direction.
Thanks in advance!