Ruby E-Discos
#1
JK Freak
Thread Starter
Join Date: Mar 2008
Location: Fernandina, Florida
Posts: 756
Likes: 0
Received 0 Likes
on
0 Posts
Ruby E-Discos
Ok so im getting a Stock rubicon electric disconnect for my sahara...It came off of a ruby with 6k miles on it and hasent been used since... The only problem is it dosent have the wiring harness...is it possible to buy the wiring separate from any web site? or will i have to rigg it up or something?
i want it to be done riht and have the stock switch put in where it should be...is this gonna be possible? Also... im getting it at only a couple hundred more than just getting JKs discos... Do the ruby E-discos show their worth? I mean are they pretty strong? i dont wanna get it all put on and hooked up and then have to worry about it dying in a week :P Any input would be great... Thanks so much
-Zack
i want it to be done riht and have the stock switch put in where it should be...is this gonna be possible? Also... im getting it at only a couple hundred more than just getting JKs discos... Do the ruby E-discos show their worth? I mean are they pretty strong? i dont wanna get it all put on and hooked up and then have to worry about it dying in a week :P Any input would be great... Thanks so much
-Zack
#5
JK Jedi Master
Join Date: Oct 2006
Location: O HI 4 Lo
Posts: 15,133
Likes: 0
Received 0 Likes
on
0 Posts
#6
JK Freak
Thread Starter
Join Date: Mar 2008
Location: Fernandina, Florida
Posts: 756
Likes: 0
Received 0 Likes
on
0 Posts
lol yeah i was just looking through the 4wd magazine and found them the problem is its a whole new switch box and its like 119 bux... is it not possible just to get the 1 switch and add it to my already owned box? seems like that would be alot easier and cheaper...but i guess ill have to do what i gotta do...
#7
JK Jedi Master
Join Date: Oct 2006
Location: O HI 4 Lo
Posts: 15,133
Likes: 0
Received 0 Likes
on
0 Posts
No, the switch box is actually a circuit. Sorry..
I'm buying a harness for my front axle, I dont need the Sway bar hook up. I just need the plug ends for the axle. I'll chop the e-disco harness end off for $50
I'm buying a harness for my front axle, I dont need the Sway bar hook up. I just need the plug ends for the axle. I'll chop the e-disco harness end off for $50
Trending Topics
#8
JK Super Freak
Join Date: Feb 2008
Location: Bartlett IL
Posts: 1,073
Likes: 0
Received 0 Likes
on
0 Posts
Wow, that more than I paid for the switch and harness from quadratec
Switch $40 http://www.quadratec.com/products/52446_110.htm mine does not have the axle lock and it cost 5 buck less. Harness was $70
http://www.quadratec.com/products/52446_111.htm
Switch $40 http://www.quadratec.com/products/52446_110.htm mine does not have the axle lock and it cost 5 buck less. Harness was $70
http://www.quadratec.com/products/52446_111.htm
#10
JK Super Freak
Join Date: Feb 2008
Location: Bartlett IL
Posts: 1,073
Likes: 0
Received 0 Likes
on
0 Posts