Rubicon JKU 10A spring swap to a Stock JK
#11
JK Enthusiast
Thread Starter
Join Date: Apr 2013
Location: Baltimore, md
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Yes that's what I bought, haven't installed them yet. I'm waiting on some additional parts and shocks to come in. I will post the results in a couple weeks after I complete the project and let you know if its worth the time and little bit of money. Oh, I also got a set of Rubi JKU rock rails ($80) and cut them down to fit the JK and attached my smitty built nerf bars to them, looks amazing
#12
JK Enthusiast
Thread Starter
Join Date: Apr 2013
Location: Baltimore, md
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
#13
JK Enthusiast
Join Date: Nov 2012
Location: Weatherford, OK
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
#14
JK Enthusiast
Thread Starter
Join Date: Apr 2013
Location: Baltimore, md
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Here is a 10a front, 006aa compared to a 58
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=525862"/>
And a rear 009aa compared to a 18
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=525864"/>
Gained an inch on JKU with heavy ass bumpers over the already installed TF level kit.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=525865"/>
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=525862"/>
And a rear 009aa compared to a 18
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=525864"/>
Gained an inch on JKU with heavy ass bumpers over the already installed TF level kit.
<img src="https://www.jk-forum.com/forums/attachment.php?attachmentid=525865"/>
#16
JK Enthusiast
Join Date: Nov 2012
Location: Weatherford, OK
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
#17
JK Enthusiast
My 10A jku has 005 front and 009 rear springs... I guess they're not all the same? ?!?
I couldn't do a regular leveling kit, since the rake is lesser than other models. So I had to go with 1/2" rear and 1" front spacers. That way it looks great.
Envoyé depuis mon MB860 avec Tapatalk
I couldn't do a regular leveling kit, since the rake is lesser than other models. So I had to go with 1/2" rear and 1" front spacers. That way it looks great.
Envoyé depuis mon MB860 avec Tapatalk
#18
JK Enthusiast
Join Date: Jul 2012
Location: Clinton, NC
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
So where is the best place to get springs? I recently added the AEV front and rear bumpers and might need to upgrade springs to keep my lift the same or increase just a little. What would be a good recommended spring upgrade over the Springs that come w a Mopar 2" lift kit?
#20
JK Enthusiast
Thread Starter
Join Date: Apr 2013
Location: Baltimore, md
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts