Rock Hard 4x4 rear bumper tire carrier
#3
JK Junkie
Join Date: Mar 2009
Location: Scottsdale, AZ
Posts: 2,368
Likes: 0
Received 0 Likes
on
0 Posts
#6
Mine rattled even after several adjustments. So I added a cam-type pull-down latch (not shown). Also the geometry of the spare carrier allows for a good bit of vibration side-to-side on washboards. I'll probably weld in a stiffener.
Otherwise I'm happy enuff. If I were buying right now there are better designs to be had.
Otherwise I'm happy enuff. If I were buying right now there are better designs to be had.
#7
JK Enthusiast
Thread Starter
Mine rattled even after several adjustments. So I added a cam-type pull-down latch (not shown). Also the geometry of the spare carrier allows for a good bit of vibration side-to-side on washboards. I'll probably weld in a stiffener.
Otherwise I'm happy enuff. If I were buying right now there are better designs to be had.
Attachment 204095
Otherwise I'm happy enuff. If I were buying right now there are better designs to be had.
Attachment 204095
Trending Topics
#9
OK, finally. Similar to this. Mounted with handle down. Had to tweak the metal with grinder as the handle needed to rotate a bit more. Works great.
http://www.carrlane.com/catalog/inde...3C3B285351415F
#10
JK Junkie
Join Date: Nov 2010
Location: Valencia, CA
Posts: 2,942
Likes: 0
Received 0 Likes
on
0 Posts