Rock Hard 4x4 Jerry Can Mount QUESTION
#1
JK Freak
Thread Starter
Rock Hard 4x4 Jerry Can Mount QUESTION
Before i pull the trigger on these, I would like to see if anyone has this setup or knows if this will work.
* I have a Rugged Ridge bumper/Tire carrier -
* I want to mount the Rock Hard 4x4 Jerry Can mounts to the tire carrier.
Will this work for me?!
Thanks
* I have a Rugged Ridge bumper/Tire carrier -
* I want to mount the Rock Hard 4x4 Jerry Can mounts to the tire carrier.
Will this work for me?!
Thanks
#3
JK Super Freak
Join Date: Oct 2010
Location: Tucson, AZ
Posts: 1,270
Likes: 0
Received 0 Likes
on
0 Posts
I can tell you in a couple days. I have that bumper/tire carrier and I have the gerry can mount on the way...gets here this week. The A-frames on both the RR and the Rock Hard are 2" box tubing...should work just fine
#4
JK Freak
Thread Starter
Trending Topics
#9
I just modified a Rock Hard driver side jerry can carrier for my Mopar carrier. I did the drivers side to see if it would work and now have ordered the passenger side. I simply had to cut off the Rock Hard mount bar (correct angle / too short) and weld on a longer bar (17 1/2 inches). I welded it on my carrier versus u-bolting it.