JayswranglerX

Hey guys,

Can anyone with the new RK 3.5 triple rates on a JKU take a quick measurement from where the upper shock bushing meets the coil bucket to the center of the lower shock bolt.
Trying to figure if the triple rates will net me the same amount of lift I have with these unkown coils that ride like crap.

I measure out at about 22 1/8"

Thanks!













Sent from my LG-LS980 using JK-Forum

JayswranglerX

I'm thinking I have about a 3.5" lift or so judging by measurements and how it looks

Sent from my LG-LS980 using JK-Forum

JayswranglerX

Can anyone help me out with this?

Sent from my LG-LS980 using JK-Forum

JayswranglerX

Nobody has this that can gimme an idea?

Sent from my LG-LS980 using JK-Forum

rbeezy05

I measured 22.75 at both left and right front. RK 3.5 tri rates with poison spyder bumper and no winch.
Hope that helps.

JayswranglerX

Ok thanks a ton ...that helps alot.
Always fun trying to figure out what you have when you buy a used Jeep with a lift already on it!

Sent from my LG-LS980 using JK-Forum

rbeezy05

No problem. The RK 3.5's actually netted about 4 inches of lift. I would bet your current springs are 3.5.

JayswranglerX

Yeah that's what I was thinking also.
Gotta get rid of these linear rate turds...that coupled with the Skyjacker M95 shocks makes every bump feel like hitting curb.

Sent from my LG-LS980 using JK-Forum