Right hand drive Lift Kits
#1
JK Newbie
Thread Starter
Join Date: Jun 2011
Location: Mandurah Western Australia
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Right hand drive Lift Kits
Hi out there.
Looking for a 3.5 lift kit to suit right hand drive 2013 Rubicon unlimited. Aiming to avoid new driveshafts. I am keen to run 37's. So who does make a premium kit for r/h? And who ships to Australia rather, than air freight$$$
Looking for a 3.5 lift kit to suit right hand drive 2013 Rubicon unlimited. Aiming to avoid new driveshafts. I am keen to run 37's. So who does make a premium kit for r/h? And who ships to Australia rather, than air freight$$$
#3
JK Enthusiast
Join Date: Nov 2010
Location: Berkshire, Uk
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
I have AEV 2.5 on my RHD CRD JK and all is good, aiming for 35s. I am sure you could go for the 3.5 or 4.5 and get 37.
As to shipping, no idea, but check AEV international dealers
As to shipping, no idea, but check AEV international dealers
#4
Sponsoring Manufacturer
#6
Mate, can recommend the suspension stuff flexi coils 3" (brisbane business there on the net) and bilstein 5160 remote reservoir, tried the synergy coils defiantly not suited to the rough roads here in OZ they get a harmonic up at speed over bumps and it nearly throws you of the road very scary, also tried the Teraflex fox remote shocks awesome shock but cant handle the small sharp edge bumps got sick of it the ride after 15000k's way to rough and pulled them all out started again my jk is heaps better now with the above gear fitted on 35" Km2's
#7
JK Newbie
Thread Starter
Join Date: Jun 2011
Location: Mandurah Western Australia
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Yeah cheers. I normally get all my jeep gear from quadra, much cheaper. Gets pricey fast down here for eg, a rancho sport kit in Us is $1200 translates to $3500 fitted from my local wkshop. Was hoping to source the next complete lift kit direct and fit myself,to get more bang for my buck! ;-) Narrowed down to tera, ft or currie. Think I'll have to bite the bullet and go 4" and driveshafts. You only live once eh? Haha! I have a 4" FT kit on my tj currently, with rancho 5000 shocks. Ok but bit noisy.