rear springs bending...help fix
#1
JK Newbie
Thread Starter
Join Date: Jan 2010
Location: colorado
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
![Question](https://www.jk-forum.com/forums/images/icons/icon5.gif)
so after the jeep has been in the wifes care for awhile now i got home and started going over my baby head to toe. to my dismay my rear springs are bending out a good bit and my swaybars are surface rusting like a mutha-trucka. heres a few quick snapshots, tell me what you guys think and how i can fix the issue. only wieght on the rear is a smittybuilt xrc bumper and spare 35" tire. I have the rear upper flex arms and front lowers currently installed as well.
![Click image for larger version
Name: DSC_0001.jpg
Views: 496
Size: 55.0 KB
ID: 122175](https://www.jk-forum.com/forums/attachment.php?attachmentid=122175&thumb=1&d=1513702534)
![Click image for larger version
Name: DSC_0002.jpg
Views: 480
Size: 43.5 KB
ID: 122176](https://www.jk-forum.com/forums/attachment.php?attachmentid=122176&thumb=1&d=1513702534)
#4
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
More permanent fix - JKS bolt-on perch, or Teraflex weld-on perch. I'm going with a Tera weld-on perch just because I worry a lot about U-bolts sliding around or something.
Rotating the axle would help some, but be careful if you rotate it too much to fix the coil bowing, it might hurt the pinion angle on your driveshaft.
#5
JK Super Freak
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
Cheapest option are the polyurethane wedges for about $35. I would recco spring retainers with this though. The next option would be the bolt-on's (about $125). I'm not too keen on the weld-on's unless you know for sure that you won't ever change your setup (lift height). I myself went with the wedges with spring retainers. Works great and no problems.
#6
Sponsoring Manufacturer
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
so after the jeep has been in the wifes care for awhile now i got home and started going over my baby head to toe. to my dismay my rear springs are bending out a good bit and my swaybars are surface rusting like a mutha-trucka. heres a few quick snapshots, tell me what you guys think and how i can fix the issue. only wieght on the rear is a smittybuilt xrc bumper and spare 35" tire. I have the rear upper flex arms and front lowers currently installed as well.
#7
JK Super Freak
Trending Topics
#8
Former Vendor
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
Sir
We offer simple poly coil spring correction wedges that will help with your issue and they will also firm up the ride due to the lost effective spring rate from the coil bowing!
Just food for thought and they are only $24.99 per pair.
Rock Krawler
We offer simple poly coil spring correction wedges that will help with your issue and they will also firm up the ride due to the lost effective spring rate from the coil bowing!
Just food for thought and they are only $24.99 per pair.
Rock Krawler
#9
Sponsoring Manufacturer
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
I've seen it at Lowes/Home Depot/Checker. Your correct on masking those off is the correct way, I'm not going to on mine.
#10
JK Newbie
Thread Starter
Join Date: Jan 2010
Location: colorado
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.jk-forum.com/forums/images/icons/icon1.gif)
thanks for the quick responses everybody. i will look into the brackets, since i dont plan on changing my lift at all should i just cut the old perches off and weld the new ones on? or is the bolt up versions better? and where did you get the spring retainers Renpia?
Last edited by couchpotato; 01-28-2011 at 04:20 PM.