Rear axel gearing question
#1
JK Enthusiast
Thread Starter
Join Date: Feb 2012
Location: Cordova Alabama
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Rear axel gearing question
I have. 08 jku with a factory rear E locker. I'm wanting to regear. I know this is a non rubie axel I have the window sticker and build sheet for my jeep. I know the rubies have a different gear size or something. My question is did Chrysler just throw a rubie axel in these jeep or are the truly a non rubicon locked axel? I guess my question is do I need a rubie gear set or a non rubie gear set for the rear?
#2
JK Jedi Master
That's a good question. There aren't many people who have that option on their non-Rbicon JK.
The best way to know for sure is take the cover off and look. If you do that, take a picture, and post it.
The best way to know for sure is take the cover off and look. If you do that, take a picture, and post it.
#4
JK Enthusiast
Thread Starter
Join Date: Feb 2012
Location: Cordova Alabama
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
I'm just thinking its a rubie housing and all.
Surely Chrysler didnt go threw all the trouble to design 2 different housings, gears and axels for 1- fir the rubie and 1- for non - rubie rear locker option. But they've done crazier stuff!
Surely Chrysler didnt go threw all the trouble to design 2 different housings, gears and axels for 1- fir the rubie and 1- for non - rubie rear locker option. But they've done crazier stuff!
#5
JK Jedi Master
I believe the Rubi gears are a lot thicker than the others.
Your best bet is to look at the gears and record the numbers.
#6
JK Enthusiast
Join Date: May 2012
Location: Rosharon, Texas
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
Does the build sheet say Tru-lok dana 44 with 4.10 gears. If it does then they most likely used a rubicon axle.
Last edited by hooper; 06-13-2013 at 07:09 PM.
Trending Topics
#8
JK Enthusiast
Join Date: May 2012
Location: Rosharon, Texas
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
#10
JK Enthusiast
Thread Starter
Join Date: Feb 2012
Location: Cordova Alabama
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Ok I dug out my build sheet and window sticker. The build sheet only showed the interior layout but. I think I hit the jackpot on the window sticker notice in the second picture it said. tru-trac (R). I hoping the (R) means rubicon!!!!! The first picture is standard equipment and the second is the optional equipment mine is equipped with.