Rancho Rear Bumper problems
#1
JK Newbie
Thread Starter
Join Date: Apr 2009
Location: mooresville, nc
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Rancho Rear Bumper problems
I just received my Rancho rear bumper with tire carrier today and spent all afternoon installing it. The bumper installed alright but the pain was the tire carrier. The hinge sleeve was already in the bushings and the wrong one was in. I tore it all up switching it out but got it to work after a bunch of beating and grinding. The screw posts for the hi-lift were off as well so it wouldn't mount right on. I beat the hell out of it with a sledge and made that fit as well after driving to Lowes to get bolts to go on the provided screws. All in all, I am semi disappointed with the whole thing, on the up side, it works, its only purpose was to hold a 37 for the time being, and it will serve that purpose but will be modified before too long.
#2
JK Enthusiast
Join Date: Dec 2007
Location: Flagstaff AZ
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
I have that bumper/tire carrier and it went on perfectly,although I had to use the included adaptor to mount my HiLift.No excessive rattling,and I have a 37 on mine,it has been great for almost 10,000 miles.
#3
JK Super Freak
Join Date: Jul 2008
Location: downingtown, PA
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
I just received my Rancho rear bumper with tire carrier today and spent all afternoon installing it. The bumper installed alright but the pain was the tire carrier. The hinge sleeve was already in the bushings and the wrong one was in. I tore it all up switching it out but got it to work after a bunch of beating and grinding. The screw posts for the hi-lift were off as well so it wouldn't mount right on. I beat the hell out of it with a sledge and made that fit as well after driving to Lowes to get bolts to go on the provided screws. All in all, I am semi disappointed with the whole thing, on the up side, it works, its only purpose was to hold a 37 for the time being, and it will serve that purpose but will be modified before too long.
#4
I just received my Rancho rear bumper with tire carrier today and spent all afternoon installing it. The bumper installed alright but the pain was the tire carrier. The hinge sleeve was already in the bushings and the wrong one was in. I tore it all up switching it out but got it to work after a bunch of beating and grinding. The screw posts for the hi-lift were off as well so it wouldn't mount right on. I beat the hell out of it with a sledge and made that fit as well after driving to Lowes to get bolts to go on the provided screws. All in all, I am semi disappointed with the whole thing, on the up side, it works, its only purpose was to hold a 37 for the time being, and it will serve that purpose but will be modified before too long.
#5
I apologize for the issues you had and we would like the opportunity to make things right. By hearing that a sleeve was installed in the bushing leads me to a lot of questions as well as some missing hardware to adapt to the several different models of hi-lifts. Can you send me a PM with your contact info and the best time you are available to give you call? Please include where you purchased the kit as well.
#6
JK Jedi Master
Damn, Rancho done kicked it in on the forum, that's the tire carrier I'm gettin cause I'm po right now. That is if I ever get my jeep back from the shop Goin on 2months now.
#7
I've been eyeballin that bumper/tire carrier for a while, in fact my GF is gettin it for my birthday. Ill be following this thread hoping everything works out for drnedatsnov and spying for a good report for when I get mine!
And damn MK, I'd be curled up in a ball crying if my rig was in the shop as long as yours hasbeen
And damn MK, I'd be curled up in a ball crying if my rig was in the shop as long as yours hasbeen
Trending Topics
#9
JK Jedi Master
I've been eyeballin that bumper/tire carrier for a while, in fact my GF is gettin it for my birthday. Ill be following this thread hoping everything works out for drnedatsnov and spying for a good report for when I get mine!
And damn MK, I'd be curled up in a ball crying if my rig was in the shop as long as yours hasbeen
And damn MK, I'd be curled up in a ball crying if my rig was in the shop as long as yours hasbeen
#10
JK Newbie
Thread Starter
Join Date: Apr 2009
Location: mooresville, nc
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
well, Rancho contacted me and informed me that my bumper was not supposed to be shipped that way, and they are not sure as to why. And the post's for the hi-lift jacks are designed for spacing on 1995 and older jacks, and that there was supposed to be adapters for the newer models, which weren't included in my batch. They apologized and were sincerely concerned. I am impressed with their quick response and concern, and they assured me that this is not a common issue, and are going to check into their stock to make sure none other's are like this.