Pure Jeep Rocker Guards
#1
JK Enthusiast
Thread Starter
Join Date: Nov 2009
Location: Boston
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Pure Jeep Rocker Guards
I have noticed some rust around the edges of my pure jeep rocker guards. They have been on my jeep for a little over a year now. Is there anything i can do to prevent it from getting worse. It is along the top edges and around the screw heads. Can i squirt some silicone on the screws. should i be concerned that the body is rusting behind the body panel or is it the panel itself? would this be covered under any type of warranty?
#2
JK Enthusiast
just looked at their website and nothing about warranty info... guess you'll have to talk with them directly but if its been over a year most likely nothing much they'll do
#4
JK Enthusiast
Thread Starter
Join Date: Nov 2009
Location: Boston
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
great. thanks for the response. i will be in touch tomorrow. The rust is not from the body, it is on the top edge of the rocker guard itself in the plate portion.
#5
JK Super Freak
Join Date: Sep 2006
Location: Wiliamsburg, VA
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
I don't have rust on mine. However, this is the type of information that would have been helpful before the install. I know I put loads of sealant on the body bolts when I installed them. Good luck
#6
JK Enthusiast
Thread Starter
Join Date: Nov 2009
Location: Boston
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Just wanted to let you all know Robert was great with me. He offered to have me send the rockers back to get re-powder coated. with shipping costs and all that wasn't really an option. He is going to send me out some touch up paint and hopefully it will match up nicely. I am definitely going to put some silicone around the hardware as well.
#7
JK Jedi Master
Join Date: Oct 2006
Location: O HI 4 Lo
Posts: 15,133
Likes: 0
Received 0 Likes
on
0 Posts
when I pulled them off (After the crash) there was no rust anywhere.
Just wanted to let you all know Robert was great with me. He offered to have me send the rockers back to get re-powder coated. with shipping costs and all that wasn't really an option. He is going to send me out some touch up paint and hopefully it will match up nicely. I am definitely going to put some silicone around the hardware as well.
I touch up the rockers after every wheeling trip, I'm always losing paint on the rockers from rocks
Trending Topics
#8
I second what Pig said. Semi satin black spray paint works well. Just mask off the area so you don't get it on the body of the Jeep.
Living in the northeast, rust is just something we have to deal with. I'm getting ready to go at the underside of the Jeep with a rattle can to clean everything up from the winter.
Living in the northeast, rust is just something we have to deal with. I'm getting ready to go at the underside of the Jeep with a rattle can to clean everything up from the winter.
#9
JK Jedi Master
Join Date: Oct 2006
Location: O HI 4 Lo
Posts: 15,133
Likes: 0
Received 0 Likes
on
0 Posts
I second what Pig said. Semi satin black spray paint works well. Just mask off the area so you don't get it on the body of the Jeep.
Living in the northeast, rust is just something we have to deal with. I'm getting ready to go at the underside of the Jeep with a rattle can to clean everything up from the winter.
Living in the northeast, rust is just something we have to deal with. I'm getting ready to go at the underside of the Jeep with a rattle can to clean everything up from the winter.