Pro Comp Series
#1
JK Enthusiast
Thread Starter
Join Date: Oct 2007
Location: Austin, TX
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Pro Comp Series
Anybody have the Pro Comp Series 7089 wheels with Cast-Blast finish?
Thoughts? Pictures?
Thoughts? Pictures?
Last edited by Robar; 09-07-2008 at 05:52 PM. Reason: PLEASE DO NOT POST DIRECT NON SPONSOR LINKS
#6
JK Enthusiast
Thread Starter
Join Date: Oct 2007
Location: Austin, TX
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the feedback and pictures. I think I'll pull the trigger and order them tomorrow.
Is the center cap metal or plastic? I'm thinking (if it's metal) of powdercoating them in red.
Is the center cap metal or plastic? I'm thinking (if it's metal) of powdercoating them in red.
Last edited by NDynamite; 09-04-2008 at 07:57 PM.
Trending Topics
#8
JK Jedi Master
Yeah, and they are not affixed into the wheel, OBTW. I busted one of mine when I took the wheel off and laid it down. I wasn't careful and just let the wheel roll around until it stopped--it wasn't going very far. But the center cap fell out and completely busted up along the mounting shoulder for it when it got stomped on by the wheel--useless after that. They're included in the wheel price, but cheaply made and quite fragile.
BTW: It doesn't matter for me because, as you may note in my pic's above, I couldn't use one for the spare anyway, without affecting my bike rack installation.
BTW: It doesn't matter for me because, as you may note in my pic's above, I couldn't use one for the spare anyway, without affecting my bike rack installation.
#10
JK Freak
Join Date: Oct 2007
Location: west chester,pa/glenwood springs, co
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
i found my wheel! i never looked at these because the pic on the website looks nothing like the wheels you guys have. maybe they are showing a 20" in this pic. i mean it looks wide open on pro comps site.