PRESS RELEASE: Off Road Evolution EVO 44 Magnum Sealed Axle Sleeves
#122
Installed my Magnun, the effect is very good.
Axels were rusty,now protected, very strong.
Installation was very easy
Can you tell me, do I have to pour more oil in the differential.
You're very good "EVO"
Axels were rusty,now protected, very strong.
Installation was very easy
Can you tell me, do I have to pour more oil in the differential.
You're very good "EVO"
#123
Sponsoring Vendor
You do not need to add more oil than what is recommended for your axle.
EVO...
#125
Sponsoring Vendor
EVO...
#127
JK Super Freak
Join Date: Jul 2008
Location: Middle of no where
Posts: 1,934
Likes: 0
Received 0 Likes
on
0 Posts
#128
JK Super Freak
Join Date: Nov 2008
Location: East Coast
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Will these sleeves interfere with this Super 30 kit? http://www.northridge4x4.com/proddet...A-S30-EV30-ARB
Or will it all go together A-okay? I'm looking to seriously strengthen my front axle without switching over to a d44...
Or will it all go together A-okay? I'm looking to seriously strengthen my front axle without switching over to a d44...
#129
Sponsoring Vendor
Will these sleeves interfere with this Super 30 kit? http://www.northridge4x4.com/proddet...A-S30-EV30-ARB
Or will it all go together A-okay? I'm looking to seriously strengthen my front axle without switching over to a d44...
Or will it all go together A-okay? I'm looking to seriously strengthen my front axle without switching over to a d44...
EVO...
#130
Evo 44 Magnum with RCY axles
I am finishing up my install, and as the title suggests, installing RCV CV style axle shafts at the same time. The grease cup on the RCV axle is pushing up snug to the EVO 44 axle sleeve, so it it will be rubbing as it rotates. Has anyone else installed this combination? Any of the same issues? Could the red rubberized RCV dust cup be trimmed a bit without sacrificing it's purpose?
On another note for those that have installed only the EVO 44 magnums, what is the distance between the sleeve and the inner most flange on the U-Joint of the stock axles?
On another note for those that have installed only the EVO 44 magnums, what is the distance between the sleeve and the inner most flange on the U-Joint of the stock axles?