PRESS RELEASE: Off Road Evolution EVO 44 Magnum Sealed Axle Sleeves
#1
JK-Forum Founder
Thread Starter
Join Date: Jul 2006
Location: Laguna Niguel, CA
Posts: 36,534
Likes: 0
Received 16 Likes
on
15 Posts
PRESS RELEASE: Off Road Evolution EVO 44 Magnum Sealed Axle Sleeves
Off Road Evolution is proud to announce the 44 Magnum. This product is designed to increase JK axle housing strength by 30% while incorporating dual seals to prevent debris from entering the axle tubes. Combining these two tried and true technologies will not only increase the strength of your axle housing, but will also help to prevent premature falure of the costly to replace inner axle seals.
• Works on all JK Front Axles (Dana 30 and Dana 44)
• Adds 30% bending strength to axle tubes
• Seals axle tube from debris
• Greasable design
For a limited time only, PreOrder the EVO "44 Magnum" Sealed JK Axle Sleeves for $159.99 with free shipping to the Continental United States. You can also add EVO C2 Gussets with your order for an additional $80.
For more information about the new EVO 44 Magnum Sealed Axle Sleeves, please visit: www.offroadevolution.com or call them at 714-870-5515
#4
JK Super Freak
Join Date: Jun 2007
Location: SoCal
Posts: 1,558
Likes: 0
Received 0 Likes
on
0 Posts
Awesome! Any idea how much ORE will charge to install these?
After the gussets and this mod the only other thing that concerns me with the stock axle is the ball joints. Are there any plans for a heavy duty ball joint for the JK's?
After the gussets and this mod the only other thing that concerns me with the stock axle is the ball joints. Are there any plans for a heavy duty ball joint for the JK's?
#5
Nice! Looks like down the road I'll be stuck building the D30 since prices for the factory D44 have gone through the roof, all though this mod will be just as important on the D44.
#7
Trending Topics
#8
JK Super Freak
Join Date: Jan 2008
Location: The Deep Dark Woods of Texas!
Posts: 1,835
Likes: 0
Received 0 Likes
on
0 Posts
Evo will you be the vendor for the seals as they need to be replaced or if you can get them over the counter.
Last edited by SASQUATCH; 03-11-2009 at 04:39 AM.
#10
JK Super Freak
Join Date: Jan 2008
Location: The Deep Dark Woods of Texas!
Posts: 1,835
Likes: 0
Received 0 Likes
on
0 Posts
Early Assumptions: Drill & slide like the other sleeves, spot weld, end weld the C2 side and insert the axle seals after the welding cools.