Biginboca

Am running teraflex 2.5" coil lift and JKS adjustable trackbar in front. Was going through retorquing bolts today and noticed that my trackbar isn't centered in the bracket on the frame side. Like maybe the bushing (sleeve?) inside this end of the trackbar has drifted out of the center of its housing. When I grab the trackbar there doesn't seem to be any play in it and its doing its job, so should I be concerned?

BTW, this trackbar was purchased new and installed in December, only been offroading a few times on dirt roads/trails so far, nothing even remotely extreme yet.

Here is a pic from underneath showing the trackbar end...

Pluke the 2

it doesn't look good. but you should call them on tuesday and talk with their customer support as they do an excellent job answering questions over the phone. they took care of my situation with the trackbar popping in n out.

fab1

I Had the same thing happen to mine I called them and they sent me a New one. The 3rd generation one.

Biginboca

Ok, thanks for the replies. I thought it might be a problem so I will call JKS tomorrow...

GunDude

Just checked mine. Same problem!

NCJeepster

Just checked mine and it's also doing the same thing

yomondo

Y'all had me concerned, so I went out and checked mine. It's off center a tiny bit, but is probably okay. I'll just keep an eye on it.

NCJeepster

I got mine with OME LT kit in Feb. I thought I had the newer one.

GunDude

Update on this issue. I talk to Mark at JKS and sent pics and link to thread. He said to give him a couple of day and will get back to me.

Northridge4x4

They will get you handled for sure.

David