A-pillar switch pod installed, need acc power
#11
JK Newbie
When I tapped my box I used an available fuse by the top right side of your pic. This way you can drill a small hole and run the wire out the side alongside the bigger wire. Hope that makes sense.
#12
JK Jedi Master
This thread shows some places to install the fuse tap that will be switched power: https://www.jk-forum.com/forums/jk-e...source-191552/
#13
This thread shows some places to install the fuse tap that will be switched power: https://www.jk-forum.com/forums/jk-e...source-191552/
#14
JK Jedi Master
tried those spots, actually bought that connector and read that article before I started. Whatever I have a fix. Gonna break the ground at the A-pillar with a small push button switch, on/off. I'm only trying to kill the led's and USB port when the key is off as my switches are lit in both on and off position