Notices
Modified JK Tech Tech related bulletin board forum regarding subjects such as suspension, tires & wheels, steering, bumpers, skid plates, drive train, cages, on-board air and other useful modifications that will help improve the performance and protection of your Jeep JK Wrangler (Rubicon, Sahara, Unlimited and X) on the trail.

PLEASE DO NOT START SHOW & TELL TYPE THREADS IN THIS FORUM

Pics for project needed

Thread Tools
 
Old 02-06-2009 | 10:46 PM
  #1  
Northernmedic's Avatar
Thread Starter
JK Freak
 
Joined: May 2007
Posts: 816
Likes: 0
From: Hinton, Alberta
Default Pics for project needed

To all those with unlimiteds running a soft top. I need pics of the interior rear cargo area with the top up. I'm working on an interior tire carrier and I need to see where the arms run. I'm running my hard top right now. Too cold to switch over just yet. thanks for any help
Old 02-07-2009 | 03:25 PM
  #2  
Northernmedic's Avatar
Thread Starter
JK Freak
 
Joined: May 2007
Posts: 816
Likes: 0
From: Hinton, Alberta
Default

Any got anything?
Old 02-07-2009 | 06:48 PM
  #3  
cyberbrain's Avatar
JK Freak
 
Joined: Feb 2008
Posts: 501
Likes: 0
From: cleveland,
Default

they are high in the corners. I dont have a pic, but there is no frame between the rear corners of the top and the bottum where it snaps to the body.
Old 02-07-2009 | 09:39 PM
  #4  
MOWrangler's Avatar
JK Super Freak
 
Joined: Mar 2008
Posts: 1,176
Likes: 0
From: Springfield, MO
Default

Originally Posted by Northernmedic
To all those with unlimiteds running a soft top. I need pics of the interior rear cargo area with the top up. I'm working on an interior tire carrier and I need to see where the arms run. I'm running my hard top right now. Too cold to switch over just yet. thanks for any help
Even with the hard top on, you will be able to feel the holes for the soft top mounts under the padding on the sport cage. There is a velcro area where it opens up and the brackets will go there. (I just leave my brackets on even when I am running the hard top.)
Old 02-08-2009 | 02:29 AM
  #5  
Northernmedic's Avatar
Thread Starter
JK Freak
 
Joined: May 2007
Posts: 816
Likes: 0
From: Hinton, Alberta
Default

I'm familiar with the mounting brackets but I need pics to see where the 2 arms run. I'm building a tire carrier that will mount to the roll bar in the back and I need to see images for planning before I start welding and bending tubing.




All times are GMT -8. The time now is 11:31 AM.