crazyhorse02

Hey guys, I bought some used OME shocks but they didnt come with bushings and little plates needed to install the fronts. The seller told me but I figured the factory ones would work, well they dont, too small. Im in a bind, can i get something that will work from a local hardware or auto store or should i try giving Dave a call at northridge? thanks

chickenman

Mine shipped missing a bushing and 2 of the plates, Dave had them to me the next day.... i vote for callin him

mkjeep

Auto parts store should have some that work, just bring the shock in.

crazyhorse02

Yeah I was thinkin the same..

nukeman

Pretty sure you're talking about the bar pins for the shocks, in addition to the bushings. Any decent auto parts store will have them, or call Dave.

Kinda strange that the seller didn't include these. The OME bushings aren't known to wear out.

Hellbound13

My OME's came with all that already installed in the shock..

phljeeper

I am sure if you give ARB/OME a call they will ship you replacements. They are not expensive parts and should be able to replace free or with a minimal fee.

DTJK

My OME LT shocks from Northridge didn't even come with a single bushing. Just 2 nuts on the bar pin.

I guess you're supposed to use your stock parts.

Northridge4x4

The Long Travel shocks dont come with new bushings for the top of the shock you are required to reuse your factory bushings which are the best bushing to use anyway.

The factory nut wont fit and that is why OME supplies a new one.

David

Hellbound13

I have the yellow OME. I assume those are the long travels? Either way they came with all the bushings. I did not have to reuse any stock parts.